scousebird
LIFE MEMBER
He's been at Canterbury P&R since covid hit. There was another full timer parked there until recently too.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yeah I mean I asked him when I was there to tell me everything warts and all and he just lied through his teeth.I understand how you feel. whenever I sell anything I am 100% up front with good and bad and that’s how I would like peaple to be with me if I am buying something.
That's beautiful but hugeOh Lord won't you buy me a Mercedes Benz.... here's a yoke with Tam Brand written all over it! Lol View attachment 777494View attachment 777496View attachment 777499
Didn't you check it when you went for it before handing over the dosh?Yeah I mean I asked him when I was there to tell me everything warts and all and he just lied through his teeth.
So now I'm discovering things everywhere needing attention.
Unless he lied about the welding Tam got a bargain. We know Tam will redo pretty much everything anywayDidn't you check it when you went for it before handing over the dosh?
Off topic from vans, but not Scotland, and funny - an American wine connoisseur makes the mistake of reviewing Buckie.
Oh stop moaning boy and get on with it! What did you expect in a van that old and for that price? The more work you do on it now,the better you’ll like it when you’re cruising over to Croatia with the dawgs asleep in the back and your fav music blaring out.I mean I asked him when I was there to tell me everything warts and all and he just lied through his teeth.
So now I'm discovering things everywhere needing attention.
I did but obviously I was keen to get on the road.Didn't you check it when you went for it before handing over the dosh?
The welding he couldn't lie about as it was advised on the mot. It's all the stupid stuff that's annoying me . I could have lost a battery driving up the road as neither are secured . And the dodgy wiring could have started a fire.Unless he lied about the welding Tam got a bargain. We know Tam will redo pretty much everything anyway
I've not started it yet lol. Been too busy removing silicone.So where is the new thread/topic for this van then, or are you just carrying on with this one?
Although the wireing looks a bit rough it all looks pretty straightforward and well fused , doesn't look to difficult to straighten out.Here's a few not so nice photos.
The leisure battery and spaghetti mess of hab electrics. ...leisure battery is located under the bonnet which I think will make increasing the bank difficult. Not sure of my options here. Would a lithium battery be OK under the bonnet uncle Lenny HB ?
Not sure what my power useage will be in this van , it has a gas fire that doesn't use electric unless you put the fans on to blow it round the van. Normal fridge, currently replacing all lights with led ones. Shurflo water pump. TV, few USB, 12v sockets etc. Really don't fancy moving all the wiring as that's above my skill level.
I need to remove it and clean up that tray, paint it and make some sort of retaining braket or strap.
View attachment 777737View attachment 777738
Starter battery , looks fairly new but have to make up some way of securing it. Also repair that hole on the inner wing. It's not structural or anything to do with mot etc it's just unsightly.
View attachment 777739
And the hole on the inner wing that's been advised on the mot the last 4 years or so. It isn't structural or near any suspension components etc so it won't cause a failure but will just get worse and it looks a mess.
I'm not welding it as I no longer have welding gear. So I'm going to cut the rust out , clean it up and repair it with aluminium and pop rivets and then cover it with seam sealer and stone guard spray. View attachment 777740
Aye hopefully it just needs tidying up. It would be an absolute headache to relocate it all inside the van somewhere .Although the wireing looks a bit rough it all looks pretty straightforward and well fused , doesn't look to difficult to straighten out.
A phrase last used by Katie Price.I've not started it yet lol. Been too busy removing silicone.
We was chatting with him in 2020 and he goes to Germany to have bits and pieces done on it, he has had it a long time and lives in it. BobOh Lord won't you buy me a Mercedes Benz.... here's a yoke with Tam Brand written all over it! Lol View attachment 777494View attachment 777496View attachment 777499
Do you mean , it would be easy for you to rip out and start again.It will be easier to move than you think, in a van of that age the wiring will be pretty simple.
Just rip it all out and start again.
£4How much is the Canterbury park and ride per night? Can't be a very cost effective way to have the same car park view every day!
Lol aye maybe to you. It's making me nauseus just thinking about it. I wouldn't even know where to start.If you get a Lithium with a built in heater it would probably OK but not something I would do.
The wiring looks a mess but most of it is what's been added. There is probably only 3 sets of basic wires to it, the hab distribution unit, the split charge relay & fridge relay.
It will be easier to move than you think, in a van of that age the wiring will be pretty simple.
Just rip it all out and start again.
Quite cheap then , not many places you'd get rent for £28 a week. Although I'm surprised no one complains at him taking up 4 parking spaces
I think he made an arrangement with Canterbury CC when covid hit and to be fair the P&R has never been that busy since. It used to be rammed on a Saturday but it's barely half full these days. There are no signs with time restrictions on display there.Quite cheap then , not many places you'd get rent for £28 a week. Although I'm surprised no one complains at him taking up 4 parking spaces
It’s £4 for 24 hrs midnight to midnight
We should know, we meet there often enoughIt’s £4 for 24 hrs midnight to midnight
Aye I've not checked that one out yet.As Chalie says, at least he fitted plenty of fuses ! The "air cooled" relay at the top left in picture one looks interesting, I wonder what it powers ?
Give lenny some pocket money and he gives you free food and new electricsAye I've not checked that one out yet.
I'm starting with the wiring to the starter battery and tracing them back etc. Found a few cables that aren't connected but all taped and cable tied to others that are .. it will be a long process I think
View attachment 777797