Show us your garage/workshop

A bit more done today wall cupboards fitted removed lights installed bubble insulation along the apex and refitted all the lights.

6513968D-6CB3-488F-A2A1-C1CBAAE62F38.jpeg
 
I bought them off EBay they are Seville garage storage, I bought the 2 Seville wall cupboards from Amazon, from same firm but £10 each cheaper than EBay.
All are stainless lockable doors.
John.
Hi John

Is the Tall wardrobe suitable for hanging Motorbike gear in if you were not using the shelving ?

TIA CJ
 
Hi John

Is the Tall wardrobe suitable for hanging Motorbike gear in if you were not using the shelving ?

TIA CJ
I suppose you could but I wouldn’t put wet gear in as they are metal, and you would have to put a rail in somehow.

John.
 
Nearly there now I’ve finished all the wall insulation, wall boarding, painting and electrics.
I’ve just got to tidy everything up and put all tools, paints and polishes away in new cupboards, and then on Wednesday my newly purchased Triumph T140 will be delivered to its new home.
John.

BB90F3C3-B1D4-4414-95F7-A77C3610104B.jpeg
224AE459-85EC-48D0-BBBB-C8EBF85F3090.jpeg

Subscribers  do not see these advertisements

 
So after some searching the internet for storage solutions for my Motorbike gear which currently hangs from the ceiling and gets damp, I found only expensive metal cabinets which I dont think would keep the moist air from my gear so I decided to purchase a 2nd hand Pine wardrobe which fits perfectly in my Garage and accommodates all my gear and keeps it all a bit warmer Win (y) Win (y), so my next job is to sand it all down and paint it like i did with my old pine computer desk (y) thats my Lock down task :giggle:

Wardrobe .jpg
2.jpg
3 (2).jpg
 
So after some searching the internet for storage solutions for my Motorbike gear which currently hangs from the ceiling and gets damp, I found only expensive metal cabinets which I dont think would keep the moist air from my gear so I decided to purchase a 2nd hand Pine wardrobe which fits perfectly in my Garage and accommodates all my gear and keeps it all a bit warmer Win (y) Win (y), so my next job is to sand it all down and paint it like i did with my old pine computer desk (y) thats my Lock down task :giggle:

View attachment 464265View attachment 464267View attachment 464268
I have a mix of secondhand cupboards benches and shelfing
Stuff from commercial kitchens is worth looking out for usually stainless steel

Subscribers  do not see these advertisements

 
I keep my bike clothing in a wardrobe in the house.
 
So after some searching the internet for storage solutions for my Motorbike gear which currently hangs from the ceiling and gets damp, I found only expensive metal cabinets which I dont think would keep the moist air from my gear so I decided to purchase a 2nd hand Pine wardrobe which fits perfectly in my Garage and accommodates all my gear and keeps it all a bit warmer Win (y) Win (y), so my next job is to sand it all down and paint it like i did with my old pine computer desk (y) thats my Lock down task :giggle:

View attachment 464265View attachment 464267View attachment 464268

That's a good solution

But I'm guessing you have one of those 'wife' things - cos my motorbike gear is in the wardrobe of one of my spare bedrooms - and yes, you've guessed it, I'm single 🙂

PS one of my motorbikes is in the dining room 🙂
 
I rebuilt my BSA Goldflash in my bedroom when i was single and lived at home 57 years ago just lucky my bedroom was downstairs.
 
When does a shed become a workshop?. I started with 6x8 shed with double doors sold as a workshop because of the doors.
I now have an 8x10 shed for a workshop with a single door that was sold as a shed. To make it a workshop it was sold with a double thickness floor costing another £50.
 
I keep my bike clothing in a wardrobe in the house.
Yeah I used too when my garage set up at my previous Home was pretty damp & miserable and small but now I have a nice Garage set up with loads of space :giggle: and the Wife is happy :whistle:
No Plate MoHome.jpg
 
This is the Bikery and welding garage. There is a second garage and another workshop with lathe pillar drill grinder etc. and a DIY 3 phase supply to run them. Even double glassed and with a carpet!! I am very lucky.

20200801_164006.jpg 20200602_182115.jpg 20200602_181921.jpg 20200527_130305.jpg 20200522_110300.jpg

Subscribers  do not see these advertisements

 
Mine is a work in progress

Garage was full so built a new garden shed from scratch



View attachment 452990



Then started making some storage for the garage

View attachment 452992
Jesus, don't let anyone know where you live with all that lovely festool gear. Best get some good security on that shed. My partner insists on keeping all his festool toys, in the house, filling the spare bedroom.

Subscribers  do not see these advertisements

 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top