Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Any ideas and also, how the hell do I reach the bits in the middle?
Just gave the MH only it's second spring wash and found that these marks, where the sealant seals the joint between cab and GRP roofline, can't be got rid of. I tried Silky cream but to no avail. Any ideas and also, how the hell do I reach the bits in the middle?
View attachment 889350
Subscribers do not see these advertisements
That's cool - where did you get it?
Subscribers do not see these advertisements
We used to use it to remove paintwork. I wouldn't put it anywhere near my bodywork.Our new Burstner also had black marks on the sealant I complained to our dealer who used brake cleaner. I have tried all manner of mild stuff to remove new patches to no avail so when sale time comes I will probably use a small amount of brake cleaner also.
Subscribers do not see these advertisements
Just gave the MH only it's second spring wash and found that these marks, where the sealant seals the joint between cab and GRP roofline, can't be got rid of. I tried Silky cream but to no avail. Any ideas and also, how the hell do I reach the bits in the middle?
View attachment 889350
You could try some mould and mildew spray. I've used it before on a caravan years ago. Just spray it on and leave for 10 minutes.Just gave the MH only it's second spring wash and found that these marks, where the sealant seals the joint between cab and GRP roofline, can't be got rid of. I tried Silky cream but to no avail. Any ideas and also, how the hell do I reach the bits in the middle?
View attachment 889350
Subscribers do not see these advertisements
Allow me to sooth it better for you.
Tried the Silky and didn't budge it.White spirit works as does the silky polish (my preferred)
No Asda on the Costa Calida ..Allow me to sooth it better for you.
You only really need an egg cup full, but it can used on the vans roof as well, simply spray it on when it's dry and going to be dry for a day or two and then simply forget it.
Mike.
Subscribers do not see these advertisements
Look for a propriety moss and algae killer in a garden centre, it'll do the same job.No Asda on the Costa Calida ..
ditto ..white spiritWhite spirit works as does the silky polish (my preferred)
Ā£4.65 per litre on Amazon UK
That's the best thing I ever did for black mould on the silicon around bath at home. I used pieces of toilet roll in neat domestos bleach pushed up against the mould to stop it drying out or dripping off before done it's job. Bit of a faff to install but leave half hour or so then rinse off & job done.ok i get a piece of kitchen paper roll soak it in bleach push it onto the sealant and leave it say 2 hrs pull the paper out and hose it off ,, it was the only thing that worked on mine
In my day job I am a handyman and experience the same issues with silicone sealant around baths. Try the thicker gel bleach brands and generously coat the affected silicone. You then need to cover it in kitchen roll or toilet paper folded a few times and also soaked in bleach as this will absorb the stain. Then apply some cling film to stop the bleach evaporating and leave overnight or longer if possible. This should remove the staining and if it doesnāt repeat the process.Just gave the MH only itssecond spring wash and found that these marks, where the sealant seals the joint between cab and GRP roofline, can't be got rid of. I tried Silky cream but to no avail. Any ideas and also, how the hell do I reach the bits in the middle?
View attachment 889350