Ducato Windscreen Scuttle Drain Holes

[A S R]

Hi ASR
I can make some to fit that. Do you just need drainage pipes in the central area where it drops down. Do you have any problems on the sides.
Cheers PaulandChrissy

Hi, the sides don’t have a problem because rain runs down and off the sides ok. The middle bit is the area that fills up. Not a great design by Burstner. I think I’d only need 1 that could go just to the side of the metal bracket. There‘s enough space to get something in the low part without having to drill through the metal then.

 

[PaulandChrissy]

Hi ASR
Will be back from France on the 15th July. Will put a little kit together for you as soon as we return.
Cheers PaulandChrissy

 

[L' Hobo]

Hi Smarty Marty
sending you a PM.

Could you send me a kit for an X250 too please?

 

[A S R]

Hi ASR
Will be back from France on the 15th July. Will put a little kit together for you as soon as we return.
Cheers PaulandChrissy

Excellent thanks. No particular rush though. I’ve had the van 5 years and not got round to doing anything yet! Just too lazy really!

 

[PaulandChrissy]

Could you send me a kit for an X250 too please?

No problem. Have made a note, and will PM you as soon as we get back on the 15th.
Cheers PaulandChrissy

^{_{Subscribers  do not see these advertisements}}

 

[A S R]

Fitted mine a couple of days ago. There’s a low part right in the middle that collects water. Burstner appeared to no be too worried about it but it’s a simple fix with a superb 3D printed kit.

 

[irnbru]

Hi Everyone
I have been working on a solution to overcome the problem of water accumulating around the base of the windscreen on X250 Fiat Ducato’s. I’m preparing a home made 3D printed kit of drainage pipe fittings complete with suitable hosing. All you will need to fit it all are drills and silicone sealant. Final testing should be finished in about a week. If anyone is interested in my solution, please let me know.View attachment 452738

Can you tell me which years the x250 is for thx

 

[PaulandChrissy]

Can you tell me which years the x250 is for thx

Hi. It fits 2006 upto 2014.

 

[irnbru]

Aaah ok! Thx I’m 2018

 

[PaulandChrissy]

Aaah ok! Thx I’m 2018

You really don’t need it on that year. The only place it leaks is from around the heating intake ductwork. You need this.

Ducato Bonnet Air Vent Leak Solution.

WE ARE AWAY FOR THE WINTER UNTILL MIDDLE OF MARCH. 😊 Hi Everyone Fiat Ducato Bonnet Vent water ingress problem. This is a 3D printed water capture tray that diverts the water dripping out of the bottom of the bonnet ventilation intake cowling between...

www.motorhomefun.co.uk

^{_{Subscribers  do not see these advertisements}}

 

[PaulandChrissy]

Aaah ok! Thx I’m 2018

I assume your a coachbuilt, not A class.

 

[jayjaysafc]

Hi Paul
I've recently bought first MH Autotrail Tracker
I've noticed the water problem so I've ordered your kit which I'm looking forward to fitting.
There is also a large drain hole around 25mm in the centre section on the drivers side
There is no pipe underneath on mine, I'm assuming there should be?
Do you know what I need there please?

 

[Revolvor]

Hi Paul
I've recently bought first MH Autotrail Tracker
I've noticed the water problem so I've ordered your kit which I'm looking forward to fitting.
There is also a large drain hole around 25mm in the centre section on the drivers side
There is no pipe underneath on mine, I'm assuming there should be?
Do you know what I need there please?

Best to tag PaulandChrissy if you want him to reply.

Edit: to "tag" someone, put @ immediately before their forum name. As you start to type, a drop-down list of names appears, from which you can select the right one.

 

[jayjaysafc]

PaulandChrissy
Hi Paul
I've recently bought first MH Autotrail Tracker
I've noticed the water problem so I've ordered your kit which I'm looking forward to fitting.
There is also a large drain hole around 25mm in the centre section on the drivers side
There is no pipe underneath on mine, I'm assuming there should be?
Do you know what I need there please?

 

[PaulandChrissy]

Hi there
you should have a Pipe like this coming from that hole. It’s a Fiat only part. Just give Them a call. I’m sure they will know what you are referring to. What’s the year of your van.

^{_{Subscribers  do not see these advertisements}}

 

[PaulandChrissy]

PaulandChrissy
Hi Paul
I've recently bought first MH Autotrail Tracker
I've noticed the water problem so I've ordered your kit which I'm looking forward to fitting.
There is also a large drain hole around 25mm in the centre section on the drivers side
There is no pipe underneath on mine, I'm assuming there should be?
Do you know what I need there please?

Picture sent for you.

 

[PaulandChrissy]

PaulandChrissy
Hi Paul
I've recently bought first MH Autotrail Tracker
I've noticed the water problem so I've ordered your kit which I'm looking forward to fitting.
There is also a large drain hole around 25mm in the centre section on the drivers side
There is no pipe underneath on mine, I'm assuming there should be?
Do you know what I need there please?

 

[jayjaysafc]

Hi there
you should have a Pipe like this coming from that hole. It’s a Fiat only part. Just give Them a call. I’m sure they will know what you are referring to. What’s the year of your van.

View attachment 737854

2011 that whole pipe is missing.
Do you think I should go back to the dealer for that?
Thanks

 

[PaulandChrissy]

2011 that whole pipe is missing.
Do you think I should go back to the dealer for that?
Thanks

Have you got a picture of the front of your van with the bonnet open.

 

[PaulandChrissy]

2011 that whole pipe is missing.
Do you think I should go back to the dealer for that?
Thanks

Have you got a picture of the front of your van with the bonnet open.


PaulandChrissy

^{_{Subscribers  do not see these advertisements}}

 

[Stewen]

Are these kits still available? If so I’d like a set please.

 

[PaulandChrissy]

Are these kits still available? If so I’d like a set please.

Hi Stewen.
I still make them. Here’s a link to my blog to help you with which items fit your van. Let me know which you need. If you are unsure, let me know.
Cheers PaulandChrissy

GUIDE To Water Deflectors Gen 3 or 4 - 3D Printed Stuff for Motorhomes

Which Engine Bay Water Deflector do I need. This is the question I get daily. So here is a guide to the deflectors and Drain Kits I make and which

motorhome3dprints.com