Anyone know where I can get a proxy alignment done on a Peugeot Boxer in the Huntingdon/Peterborough area (12 Viewers)

[Two on Tour]

Was about to leave for an MOT this morning when the dreaded airbag ecu failed.
I have a new ecu on the way, but it will need a proxy alignment via a DiagBox or maybe a Snap-on diagnostic scanner.
Not having any luck finding anyone around me, and the Peugeot main dealers are idiots that have not got a clue what I'm talking about.

 

[fishplug]

Not quite on your doorstep, but not a million miles away either.

Cambridge Vehicle Services specialise in campers (although they do general work too). Might be worth giving them a call, although their waiting list is usually quite long.

It's long because they do a good job at a fair price and don't set out to fleece you. When I had a diesel runaway moment with my Sprinter, they had a look and confirmed the engine was beyond economical repair and didn't charge me for the diagnosis.

I'm guessing you've tried Marshalls St Neots, Peterborough and Cambridge, but there's also York Ward & Rowlett in Wellingborough and Richard Sanders in Kettering who might be worth approaching. I have no experience of them directly but they're the nearest non-Marshalls places to you.

 

[Jimbohorlicks]

Was about to leave for an MOT this morning when the dreaded airbag ecu failed.
I have a new ecu on the way, but it will need a proxy alignment via a DiagBox or maybe a Snap-on diagnostic scanner.
Not having any luck finding anyone around me, and the Peugeot main dealers are idiots that have not got a clue what I'm talking about.

Hi . I cant help with the proxy alignment, but do sympathise with your problem . Mine has just gone as well and apparantly it can't be reprogrammed and needs a new ecu. Where did you buy your new ecu from if you can advise please.
I would have a similar issue with proxy alignment as my local Peugeot garage doesn't want my van in as it's too big for their ramps despite me advising it can be sorted without ramps.
Thanks Jim

 

[Jev88]

Private message me and I will give you phone number of Dan Wilson - Peterborough auto electrician that often deals with commercial vans and buses etc ...

 

[Two on Tour]

Hi . I cant help with the proxy alignment, but do sympathise with your problem . Mine has just gone as well and apparantly it can't be reprogrammed and needs a new ecu. Where did you buy your new ecu from if you can advise please.
I would have a similar issue with proxy alignment as my local Peugeot garage doesn't want my van in as it's too big for their ramps despite me advising it can be sorted without ramps.
Thanks Jim

Hi Jim, I had a hunt around for a new OE one and ended up buying from these guys.
You will need to make sure that the one you buy has exactly the same part number as your original unit

OE Airbag ECU Control Module Unit, Fiat Ducato 02/09/2011-2014 1370978080 | eBay

OE Airbag ECU Control Module, suitable for: Citroen Relay - 02/09/11-2014 Fiat Ducato - 02/09/11-2014 Peugeot Boxer - 02/09/11-2014 OE Part Number Reference:1608428080, 1370978080, 16 084 280 80, 1366119080, 1606936380, 16 069 363 80, 01370978080, 01366119080 IF YOU ARE UNSURE OF COMPATIBLITY...

www.ebay.co.uk

^{_{Subscribers  do not see these advertisements}}

 

[TinaLes]

Hi Paul, we did hear that there was a faulty batch of Seatbelt ECU's fitted to vans in the 2017/18 era, and has been discussed many times having them re-flashed didnt work or even if it did work the unit would fail again after a short time, with no refund offered by Crash Data.
I then took heart in that the new ECU's supplied by Fiat had a different part number, and of course hoped and assumed they were upgraded to fix the problem the originals had experienced.
I suppose we can only guess if the new units supplied have been modified to sort out the problem, even if its only got a 12/24 at best warranty.
Good luck with your new replacement, it really is a pain in the rear to see the same problem appearing after all these years have surpassed, and across all the different manufacturers that use the same platform.
Why the new replacement units need to be re-proxy aligned is another con, they should be plug & play, like for like as they are doing the same job.
Best wishes.
LES

 

[Jimbohorlicks]

Cheers Paul. Will have a look.
its the proxy alignment that's the issue.Finding someone to do it.
Northern autotech also sell a unit but that needs proxy alignment or he can do it in situ but in Morcambe. They appear to be very helpful .
( just checked the price on that link.. OUCH!. Then plus the proxy alignment)
Ps it's the same part number as mine BTW.

 

[Terry]

No idea if this is any use but Lisa put it on the Drax for sale
Fiat Airbag module.
Brand new but tried on my van before it was decided that another Fiat professional garage had supplied the wrong one. Had such a bad experience that I never went back for a refund.
I’ve since found out that it’s possibly for a 2017 onwards but please check this out for yourself using the code shown.
£150 as seen.

 

[Two on Tour]

No idea if this is any use but Lisa put it on the Drax for sale
Fiat Airbag module.
Brand new but tried on my van before it was decided that another Fiat professional garage had supplied the wrong one. Had such a bad experience that I never went back for a refund.
I’ve since found out that it’s possibly for a 2017 onwards but please check this out for yourself using the code shown.
£150 as seen.

Hi Terry, many thanks for your message and offer, but unfortunately it's a different part number to the one on our 2013 van.

 

[Terry]

Not a problem Paul I just remembered Lisa put it on the Drax for sale thread. I even looked and found it hence me copied and posted
Thanks

^{_{Subscribers  do not see these advertisements}}

 

[Sleeveless]

If it helps , here' s the link to a map of Peugeot Planet / Diagbox users who offer their services. A 2013 model yearY Boxer will probably be Peugeot Planet rather than Diagbox , I'm not sure of the exact change over date though. https://www.google.com/maps/d/viewer?mid=1bBtaE8HU735jt9sS9DbgNlsxGuk&msa=0&ll=53.93411481912782,-3.0971737431698365&spn=10.238651,28.54248&z=9

 

[Juandeatatime]

Hi, it’s an 75 minute drive away, but when our airbag ecu failed (Peugeot Boxer but Fiat part) a couple of weeks ago we ended up driving to Desira Peugeot in Bury St Edmunds. Very helpful in getting part and fitting the Fiat part. Interestingly the technician told me that Fiat has issued instructions to fit an extra earth lead on ecu.

 

[Sleeveless]

Hi, it’s an 75 minute drive away, but when our airbag ecu failed (Peugeot Boxer but Fiat part) a couple of weeks ago we ended up driving to Desira Peugeot in Bury St Edmunds. Very helpful in getting part and fitting the Fiat part. Interestingly the technician told me that Fiat has issued instructions to fit an extra earth lead on ecu.

Pic of the earth strap service measure below , but for the common fault code of B0100-49, the problem exists internally in the ECU, the culprit being the ground connection contact pads on the PCB (circled below ) , these become tarnished, causing excessive resistance between PCB and the casing of the ECU , throwing up the above code, and no end of external earth straps will help in that case. Dealers won't take these apart to clean pads for liability reasons but the repair is surprisingly simple.

 

[Two on Tour]

Pic of the earth strap service measure below , but for the common fault code of B0100-49, the problem exists internally in the ECU, the culprit being the ground connection contact pads on the PCB (circled below ) , these become tarnished, causing excessive resistance between PCB and the casing of the ECU , throwing up the above code, and no end of external earth straps will help in that case. Dealers won't take these apart to clean pads for liability reasons but the repair is surprisingly simple.



View attachment 954309

View attachment 954310

I'm getting no fault codes on mine, so presumably a comms failure ?

 

[Two on Tour]

Not quite on your doorstep, but not a million miles away either.

Cambridge Vehicle Services specialise in campers (although they do general work too). Might be worth giving them a call, although their waiting list is usually quite long.

It's long because they do a good job at a fair price and don't set out to fleece you. When I had a diesel runaway moment with my Sprinter, they had a look and confirmed the engine was beyond economical repair and didn't charge me for the diagnosis.

I'm guessing you've tried Marshalls St Neots, Peterborough and Cambridge, but there's also York Ward & Rowlett in Wellingborough and Richard Sanders in Kettering who might be worth approaching. I have no experience of them directly but they're the nearest non-Marshalls places to you.

The only joy I have had so with all of the suggestions is York Ward & Rowlett at Wellingborough who are happy to take £120 + vat off of me.

^{_{Subscribers  do not see these advertisements}}

 

[Sleeveless]

I'm getting no fault codes on mine, so presumably a comms failure ?

What are you checking it with ?

 

[fishplug]

The only joy I have had so with all of the suggestions is York Ward & Rowlett at Wellingborough who are happy to take £120 + vat off of me.

Well, it's a starting point I suppose...

 

[Jimbohorlicks]

The only joy I have had so with all of the suggestions is York Ward & Rowlett at Wellingborough who are happy to take £120 + vat off of me.

Pm sent

 

[Jimbohorlicks]

I'm getting no fault codes on mine, so presumably a comms failure ?

What have you checked it with Paul?

 

[Two on Tour]

What have you checked it with Paul?

I have looked at what my reader can and can't do, and reading the airbag fault codes is a no.

^{_{Subscribers  do not see these advertisements}}

 

[Jimbohorlicks]

I have looked at what my reader can and can't do, and reading the airbag fault codes is a no.

If that's with an obd2 type checker then it doesn't scan ecu modules. You need something like a multicuscan or similar.
What is your reader type?

 

[philthefish]

Try wilderspin garage at fen Drayton, 01954 230273.

 

[Two on Tour]

If that's with an obd2 type checker then it doesn't scan ecu modules. You need something like a multicuscan or similar.
What is your reader type?

It's a Vgate Icar. I have a Diagbox (PSA version of a Multicuscan) which would have done the job and done the proxy alignment, but the last software update screwed up.

 

[Two on Tour]

Try wilderspin garage at fen Drayton, 01954 230273.

Thanks, I'll give them a ring, but they don't list Peugeot on their website.

 

[Jimbohorlicks]

Deleted pm sent