Water drip from supply to basin tap. (1 Viewer)

[Aji]

Adria Twin Sgx.

Any advice will be appreciated.

The water supply to the basin tap has developed a leak.
Pictures attached.
If I pull the yellow pin, does this allow the hose connection to come free from the body.?
Do these connections have an "O" ring seal?
If there is no "O" ring will I have to replace a cartridge / complete tap?

Thanks

Ally

 

[Landy Andy]

Remove water pressure. Pull out yellow pin, pull out pipes from tap base. Inspect o rings on tap tails. Fit new, lubricate, re assemble.

I don’t like those fittings, and prefer to have flex tails direct into the tap body. Those fitted pull unevenly on the seal.

 

[Aji]

Remove water pressure. Pull out yellow pin, pull out pipes from tap base. Inspect o rings on tap tails. Fit new, lubricate, re assemble.

I don’t like those fittings, and prefer to have flex tails direct into the tap body. Those fitted pull unevenly on the seal.

Hello Landy Andy,

I'll get onto it tomorrow, many thanks for your help,

Ally

 

[Aji]

Removed the tap etc.

Pulled the yellow pin and then pulled the connecting pipes from the body.
Replaced the "o" rings, lubricated and refitted.
Connected everything and tested.
All good and no leaks or drips.

Thanks Landy Andy for your help ,

Ally