Thetford t2160 12v supply

[Poutie57]

Hi all, I’ve posted this on here as reading other posts I think it’s possible to just pick up the 12v supply from the existing wiring when replacing a rmd 8505 and installing the t2160 instead I’m hoping someone could give just give me the heads up how to bridge the cbe distribution board.
I’ve attached the photos of my cbe RB550-LK linked to a pc320 control panel it’s from a LAIKA kreos 5009 2016.
I think you just need to bridge 3-4 on block 2 to make this happen as you do on the Carthago board, any assistance would be greatly appreciate

 

[Lenny HB]

Unfortunately those pages don't give the info needed.
You need to look through the manual for the mention of a link for use with AES or Compressor fridge.

 

[Poutie57]

The only of info in the manual is this

 

[Lenny HB]

Show us a photo of the full board.

Also have you tried switching the fridge to 12v manually as it may already be wired for it.

 

[Poutie57]

Best I can do the LAIKA set up is nowhere near as good as the Carthago set up

^{_{Subscribers  do not see these advertisements}}

 

[Lenny HB]

Not much help I'm afraid.
Is there a Laika OC or FB group you could ask.

 

[Poutie57]

I’ve given camper uk a bell so hopefully they come back with the correct process to wire it in

 

[Lenny HB]

I’ve given camper uk a bell so hopefully they come back with the correct process to wire it in

Don't count on it, gave my dealer a ring about the S+ on the newer fridges as it's marked as PV by the connector, I thought I'd just make sure before bunging 12v on it.
Frightened the living daylights out of them they didn't have a clue what I was talking about.