Thetford Customer Service (2 Viewers)

[DerryW]

As above. Bit of a long shot. but, does anyone have a contact telephone number for Thetford.

Thanks in anticipation.

 

[meanders]

It will not get you anywhere. I found it a couple of years back... They will only talk to dealers and certified service companies. Emails to the CEO did not exact any response.

 

[DerryW]

It will not get you anywhere. I found it a couple of years back... They will only talk to dealers and certified service companies. Emails to the CEO did not exact any response.

Thanks meanders.
I could not find any contact details for Thetford eu anywhere on the web. However I did find a number for the Netherlands office who were only happy to give me the number for the UK customer service dept: 01709 766750. Email: infogb@thetford.eu
Now the good bit (for me at least) Thetford are replacing the entire power control unit including fitting under warranty even though the unit is out of warranty. Result and a big thumbs up for Thetford.

Thanks to everyone who responded to my original post.

 

[meanders]

Glad you put the number here so others can find it. Hopefully they are changing their attitude from pre pandemic.

 

[DerryW]

What the person (Sarah) said is they are aware of a small number of faulty PCB’s which they’re replacing with an upgraded module (I think she said with 4000 model)
Under warranty.
I had to send them the serial number and photograph of the faulty PCB.

^{_{Subscribers  do not see these advertisements}}

 

[WESTY66]

Blummin Eck that’s a Rotherham suburb number

 

[IRHP]

What the person (Sarah) said is they are aware of a small number of faulty PCB’s which they’re replacing with an upgraded module (I think she said with 4000 model)
Under warranty.
I had to send them the serial number and photograph of the faulty PCB.

They sent me a new one FOC outwith warranty. It was a 3000 series but I think it's the same PCB. with the amount of failures I've heard about its more than a "small number "

 

[DerryW]

Following on from the above. Whilst we wait for the new module to be fitted, would we be able to use the fridge on either 240v EHU or Gas. I have disconnected the 240v and 12v supplies at the joining blocks, purely as a safety measure.

Thanks Derry

 

[IRHP]

Following on from the above. Whilst we wait for the new module to be fitted, would we be able to use the fridge on either 240v EHU or Gas. I have disconnected the 240v and 12v supplies at the joining blocks, purely as a safety measure.

Thanks Derry

As long as you have the low current power feed connected for the fridge controls and the pcb still connected I would think it will work unless the pcb is damaged. With the 20 amp fuse on mine blown it still worked on gas and 240v ac