Morelo Carbon Fibre Look - Vinyl Cleaning

[RogerThat]

I totally get the white fridge vent comment and I actually looked at mine only yesterday wondering what could be done with it as I hate the fact it doesn't match the bodywork

How about one of these mobile dent-master / chips-away guys? They can colour match anything

I might cost a bit, but it'll look amazing afterwards

 

[funflair]

Wow! I didn't think I would like it but I really do like that.
What model is it as the toilet locker (small one) is on the other side on our Palace

Loft 78F so French bed and we have been sat it it half the day

The graphics look great and have been my favourite for a long time, looks good with white mirror casing as well, I wonder if they would paint the fridge vent at the same time for the €600 they charge for the mirrors , the black is black not carbon but it has carbon on the front still.

Martin

 

[Hymer Life]

Colour-coded mirror casing would be nice as I don't like the black version. Is that even a Morelo option or a possible DIY one?
There may be a few owners prepared to buy them if white were available

 

[Hymer Life]

How about one of these mobile dent-master / chips-away guys? They can colour match anything

I might cost a bit, but it'll look amazing afterwards

Now there's a bright idea!

 

[RogerThat]

They could colour match your mirrors at the same time

^{_{Subscribers  do not see these advertisements}}

 

[Blue Knight]

Now there's a bright idea!

Those guys provide a great mobile service but if it was my Morelo then I would aim to call them when the ambient air temperature picks up a bit and not when it was so bl○○dy cold outside as it is now.

Why?

.........because if it's too cold outside then your paint can potentially suffer from something called 'solvent popping' which creates a pin-like bubble effect in the clear coat OR, if the paint cures too slowely then the paint surface could potentially end up looking and feeling like the texture of an orange.

Just be careful sir,

Andrew

 

[sallylillian]

Colour-coded mirror casing would be nice as I don't like the black version. Is that even a Morelo option or a possible DIY one?
There may be a few owners prepared to buy them if white were available

It's a Morelo option on the special options list not freely available. I got one and translated it ?

 

[Hymer Life]

Those guys provide a great mobile service but if it was my Morelo then I would aim to call them when the ambient air temperature picks up a bit and not when it was so bl○○dy cold outside as it is now.

Why?

.........because if it's too cold outside then your paint can potentially suffer from something called 'solvent popping' which creates a pin-like bubble effect in the clear coat OR, if the paint cures too slowely then the paint surface could potentially end up looking and feeling like the texture of an orange.

Just be careful sir,

Andrew

All good advice there, thanks.
It is cold today, isn't it?

 

[Hymer Life]

It's a Morelo option on the special options list not freely available. I got one and translated it ?

I would have expected nothing less!

Does it also have an option to select "rattle free" versions?

 

[sallylillian]

I would have expected nothing less!

Does it also have an option to select "rattle free" versions?[/QUOTE
Yes 0123-5678, E5000

^{_{Subscribers  do not see these advertisements}}

 

[Hymer Life]

You have too much time ........

 

[Hymer Life]

OK big issue with me, my mate has an Adria with the very same "Fablon" and he gave up keeping it clean. My survey of the 3 Morelo owners on here resulted in a unanimous vote of "would not have it again". It is a circa E1500 option and after asking to see one without when we were at the factory in September I confirmed my cancellation of it.
What to do for you guys that have it?
My mate peeled it off his Adria and we all agreed it looked fantastic.

I cleaned mine again at the weekend and again was so frustrated with it I looked at it and almost started the peeling but then thought, what if it's really hard to get off and doesn't fully come off around the windows etc. so I bailed, this time!

On that point, are the windows installed before or after the vinyl goes on; I can't really remember from the factory tour but I think the windows go in afterwards.

 

[sallylillian]

I cleaned mine again at the weekend and again was so frustrated with it I looked at it and almost started the peeling but then thought, what if it's really hard to get off and doesn't fully come off around the windows etc. so I bailed, this time!

On that point, are the windows installed before or after the vinyl goes on; I can't really remember from the factory tour but I think the windows go in afterwards.

I think they are fitted afterwards. Look at this video, if you can, about 25-26 minutes Andreas gets to explaining.


Notice the bubbles in the Home carbon!!!!

 

[Hymer Life]

I think they are fitted afterwards. Look at this video, if you can, about 25-26 minutes Andreas gets to explaining.


Notice the bubbles in the Home carbon!!!!

Yeah, saw that. Not cool, at all!

 

[Martyn911]

A very interesting video. Hopefully collecting our Concorde Centurion at the end of July. This will be our third Concorde, and have specified Glass planking to the side walls. I was actually considering having the vinyl graphics removed from the last Liner and getting a metallic grey paint job.

^{_{Subscribers  do not see these advertisements}}

 

[Hymer Life]

A very interesting video. Hopefully collecting our Concorde Centurion at the end of July. This will be our third Concorde, and have specified Glass planking to the side walls. I was actually considering having the vinyl graphics removed from the last Liner and getting a metallic grey paint job.

Congratulations!

What made you change your mind about the grey paint job? Did you look at a vinyl wrap at all?

 

[Theonlysue]

So tell me, how is that helpful?

Why don't you go waste your time elsewhere?

It's just a bit of fun.

 

[Martyn911]

Congratulations!

What made you change your mind about the grey paint job? Did you look at a vinyl wrap at all?

Thank you. I changed my mind because we have wanted Centurion from when Concorde started manufacturing them. But only available at the time on a 26 Ton and over 10 meters. We did look at one and it was massive so we went for a Liner Centurion style on MB Atego 990G 12 Ton. So when Concorde announced the manufacturing of the Centurion on MB Atego 990GL15Ton with the option of Glass Planking instead of vinyl graphics.