Integra 635LS - CBE 31800

[Ian O Sullivan]

Hi all,

I have only picked up our new 2005 Eura Mobil Integra 635LS. When we went to view it the week previous I checked all the electrics to which everything was working. Battery voltages were ~12.8V for B1 & B2, but when we left the previous owner left the control panel on with lights and TV on. When we picked it up and brought it home I noticed the CBE 31800 control panel showed 0V for B1 & B2 and the amps was -9.4A. internal and external temperature are 0.2 and 2.5 degC. I charged up the batteries and they are now at 14.3V but the control is reading the same 0V and -9.4A and nothing will switch on. I see in the manual that the controller switches loads off at 10V.

Has anyone else had a similar experience and if so what was the fix?

Thanks in advance, Ian.

 

[GeoffnDee]

Try holding the power on and prog. button for 10 secs. release and repeat , it may reset the control panel .
If that does not work try contacting www.apuljackelectronics.co.uk who may be able to advise you as there could be a capacitor that has discharged in the control panel.

 

[Ian O Sullivan]

Try holding the power on and prog. button for 10 secs. release and repeat , it may reset the control panel .
If that does not work try contacting www.apuljackelectronics.co.uk who may be able to advise you as there could be a capacitor that has discharged in the control panel.

Excellent, I'll give that a shot in the morning, thanks!

 

[Ian O Sullivan]

Hi so I tried that this evening and to no avail. The buttons for the voltages, current and temperature don't work now, so I think it's the whole unit that's on the way out!

 

[GeoffnDee]

It was worth a try , time to contact Apuljack to see if they can help , unless you have someone who could check the display/control for a possible faulty supercapacitor causing it not to power up. (as , I have been told , can happen in some CBE control panels)

^{_{Subscribers  do not see these advertisements}}

 

[Ian O Sullivan]

So the internal battery is at 800mV. So hopefully once replaced should sort it out!!

 

[Jon.Ess]

Hello.
I have just, within the last week joined the group and noticed that you were having problems with your CBE 38100 control panel.
Did you manage to rectify the problem?
I ask because my Euramobil Activa is fitted with an identical unit and I’m experiencing problem with it and having great difficulty in trying to sort it out.
Kind regards, Steve.

 

[CAB96]

Hello.
I have just, within the last week joined the group and noticed that you were having problems with your CBE 38100 control panel.
Did you manage to rectify the problem?
I ask because my Euramobil Activa is fitted with an identical unit and I’m experiencing problem with it and having great difficulty in trying to sort it out.
Kind regards, Steve.

I'm afraid the original poster was a free member and can no longer post.