High level Lights Autotrail (1 Viewer)

[pelican]

I have lost one of the high level front lights from my 2009 Autotrail Apache, Noticed whilst checking for MOT (tomorrow)
So far have drawn a blank with E bay etc. It's a Hella part but not in current catalogue.
Any suggestions appreciated

 

[almichie]

Take it out and check voltage is getting to it first? Might be a simple connection issue which can be resolved without replacing.

 

[Gellyneck]

Take it out and check voltage is getting to it first? Might be a simple connection issue which can be resolved without replacing.

Think the OP pelican might just have lost the lens cover to the light and is looking for a replacement but.....

 

[raysalaugh]

How about this one, it's a Hella from Diycarserviceparts.co.uk

 

[pelican]

Thanks for info, ideally I would like a flush mounted unit with just a small hole for the wires.

I have lost one of the high level front lights from my 2009 Autotrail Apache, Noticed whilst checking for MOT (tomorrow)
So far have drawn a blank with E bay etc. It's a Hella part but not in current catalogue.
Any suggestions appreciated

To get through MOT I had to resort in removing both lights and fitting blanking plates.
Can now find replacements at OAP Speed!

^{_{Subscribers  do not see these advertisements}}

 

[raysalaugh]

Have a look on Amazon there some LED marker lights which should be a straightforward replacement.

 

[pelican]

Have a look on Amazon there some LED marker lights which should be a straightforward replacement.
View attachment 882092View attachment 882093

Thank you for info .
However I spent half an hour searching Amazon and cannot find them shame as they look ideal.
Any further pointer would be appreciated.

 

[Lenny HB]

Here they are, took me 30 seconds to find

https://www.amazon.co.uk/dp/B0B41TG2Q7/?tag=mhf04-21

 

[pelican]

Here they are, took me 30 seconds to find

https://www.amazon.co.uk/dp/B0B41TG2Q7/?tag=mhf04-21

Thankyou, You must have faster internet where you are based.
Shame just slightly too large and need 12v, So please find following 65 mm diameter single mode 12 v

 

[Lenny HB]

Sorry I didn't notice the 24v.
Here are some Joken ones that are 60mm dia.

LED Front Marker Light | 12V | Jokon 11.1023.000, E2-07077

LED Front Marker Light, Jokon 07077-07078, reference Jokon 11.1023.000, type PLR 60b/12, Jokon 111023000, integrated reflex reflector.

quickparts.mobi

^{_{Subscribers  do not see these advertisements}}

 

[Gellyneck]

Thankyou, You must have faster internet where you are based.
Shame just slightly too large and need 12v, So please find following 65 mm diameter single mode 12 v

Is this the 12v version?

https://www.amazon.co.uk/dp/B0BFDLNRK1/?tag=mhf04-21

Having said that check the diameter as they may be too big. They would be for our 2013 AT.

 

[pelican]

Is this the 12v version?

https://www.amazon.co.uk/dp/B0BFDLNRK1/?tag=mhf04-21

Having said that check the diameter as they may be too big. They would be for our 2013 AT.

Thank you.
I will re-measure space available as maybe too large.
Unforntunately they dont mention method of fixing apart from 5 mm hole. Maybe its a sikaflex job!

 

[pelican]

Sorry I didn't notice the 24v.
Here are some Joken ones that are 60mm dia.

LED Front Marker Light | 12V | Jokon 11.1023.000, E2-07077

LED Front Marker Light, Jokon 07077-07078, reference Jokon 11.1023.000, type PLR 60b/12, Jokon 111023000, integrated reflex reflector.

quickparts.mobi

Thanks very much that now gives me options.
Thank you for your time.

 

[Gellyneck]

Just remembered this thread!

Maybe Dane Diabalo will be able to help as he probably bu**ered his front one up when trying to fix it!

Marker lights

Anyone know how to remove the top front and rear marker light lenses on a 2013 Mohawk?

www.motorhomefun.co.uk

 

[Bessy765]

We’re your original marker light led if not you may find problems we had a 2008 Bessacar had the same problem fitted a led instead of the festoon bulb and the lamp failure light came on using led.

^{_{Subscribers  do not see these advertisements}}

 

[Gellyneck]

We’re your original marker light led if not you may find problems we had a 2008 Bessacar had the same problem fitted a led instead of the festoon bulb and the lamp failure light came on using led.

possibly "non-compatible" with the ECU?

 

[Lenny HB]

We’re your original marker light led if not you may find problems we had a 2008 Bessacar had the same problem fitted a led instead of the festoon bulb and the lamp failure light came on using led.

Can be overcome by fitting a ballast resistor.

 

[pelican]

Can be overcome by fitting a ballast resistor.

this seems to be getting complicated!
I have found a listing for the originals and have contacted Caravan Components re availablity.

 

[pelican]

possibly "non-compatible" with the ECU?

No they are traditional festoon bulbs. I have now found a possible supplier Caravan Components.

 

[Revolvor]

possibly "non-compatible" with the ECU?

On our 2009 Autotrail, the high level lights are powered by the EM50, behind the driver's seat, so not part of CANBUS.

^{_{Subscribers  do not see these advertisements}}

 

[Diabalo]

Just remembered this thread!

Maybe Dane Diabalo will be able to help as he probably bu**ered his front one up when trying to fix it!

Marker lights

Anyone know how to remove the top front and rear marker light lenses on a 2013 Mohawk?

www.motorhomefun.co.uk

Nope, still not got mine off, I bottle it every time I try, just praying a bulb doesn't need replacing.

 

[pelican]

Well a other dead end shown on website but discontinued.
Now found similar by Britax £11 each!

 

[Diabalo]

According to someone on the Faceache site (Auto-Trail Owners Club For People Who Aren't Miserable Arseholes) they are the same as the old style Landrover defender sidelights.

 

[Gellyneck]

According to someone on the Faceache site (Auto-Trail Owners Club For People Who Aren't Miserable Arseholes) they are the same as the old style Landrover defender sidelights.

I refer you back to post #21. No excuse now so extract the digit.

 

[Diabalo]

I refer you back to post #21. No excuse now so extract the digit.

Yea but i still dont how they come out/off. I think they may be a sealed unit so the lens doesn't come off.