Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I’m not arguing with you as a person trained in fire safety by Wiltshire Fire and Rescue back in the 90s there was never a correct position issued by manufacturers or health and safety or anyone else as far as I knew and it was more or a common sense approach, as for changing batteries I don’t think you can change them in sealed units and as for advice from TGWU consultation please don’t take this personally you can stick it where the sun don’t shine thanks very much they are not doing anyone any favours at the momentSo you spend a few pounds and change the battery for a new one, isn't your life, and others, worth it?
You also say there is no correct place in a PVC? My Murvi has the CO2 detector, above the bed and under the fixed overhead cupboards opposite the sliding door and the Smoke alarm on the wall near the TV at the end of the kitchen near the extinguisher and Fire Blanket.
As an 1980's ex-TGWU Health & Safety Officer, I'm happy with both (Consultation are available at a reasonable cost!)
PS. My CO2 alarm has a white flashing LED and my Smoke alarm has red. (to test, just burn the toast occasionally.)
I’m not arguing with you as a person trained in fire safety by Wiltshire Fire and Rescue back in the 90s there was never a correct position issued by manufacturers or health and safety or anyone else as far as I knew and it was more or a common sense approach, as for changing batteries I don’t think you can change them in sealed units and as for advice from TGWU consultation you can stick it where the sun don’t shine thanks very much they are not doing anyone any favours at the moment
There are many test sprays etc available, the test button only tests the alarm sound is operating.Not wishing to be Pedantic but no one has answered how you know a CO alarm is working
Not wishing to be Pedantic but no one has answered how you know a CO alarm is working
Eh? DavieA I'm very sorry indeed for your loss. I have a carbon monoxide alarm in my living room.Please don’t underestimate the importance of smoke and carbon monoxide alarms.
One winter a few years back, my mate’s uncle and aunt lost their life to carbon monoxide poisoning. They had draft proofed their living room which had a gas fire. Gas fire was on and both fell asleep due to lack of oxygen
I want to give that a funny emoji thinking of our PVC, but it is not a funny subjectIf you follow 'correct" positioning as below, where in a motorhome could you fit one?
As installing a CO alarm is the only available option to help detect and prevent the effects of carbon monoxide, it is highly important this is done correctly. Here are some best practice recommendations:
The British Standard EN 50292 standard also recommends that an alarm is not fitted:
- Carbon Monoxide alarms should be fitted in every room that contains a fuel burning appliance
- They should be at least 300 mm from any wall (for ceiling mounted alarms)
- At least 150 mm from the ceiling, above the height of any door or window (for
- wall mounted alarms)
- Between 1 and 3 m (measured horizontally) from the potential source of CO.
- In an enclosed space
- Where it can be obstructed
- Directly above a sink
- Next to a door, window, extractor fan, air vent or similar ventilation opening
- Where the temperature may drop below –5 ºC or exceed 40 ºC.