Dash cam wiring (1 Viewer)

[BusyBuilder]

In my Fiat based Hymer I'm trying to hard wire my Nextbase dashcam.
On the fuse box by drivers knee I've tried fuse numbers 47 and 48, electric windows using a piggy back fuse but the camera stays on all the time.
Cn some one give my a fuse to use so the camera works with ignition?

 

[Guigsy]

The windows stay active for a minute or so after the key is pulled.

I wired mine to the radio fuse.

 

[Orion]

Use a multimeter to locate a suitable ‘ignition on’ one?

 

[MichaelT]

On my 24 plate the top row are ignition based i used the top rh one for usb socket and will use same for camera when I get round to it

 

[cyberyacht]

Doesn't he dash auxiliary socket (DIN/Ciggy/USB) work off the ignition? That's what I use.

^{_{Subscribers  do not see these advertisements}}

 

[pappajohn]

Does your interior light dim slowly when you close the door with ign off?
If so its on a live delay and power is cut once the light goes out. Takes a few seconds.

 

[Orion]

Is the Nextbase camera detachable and on a powered mount? TBH I thought about having an ignition feed to mine but decided on a permanent live as I can then leave it powered up and working when parked up in public areas but remove it easily enough at night or at home.

 

[Gellyneck]

This is the layout of the fuse panel at the drivers right knee of our 2013 FIAT Ducato based AT and a photo of the fuse / connections we used.

Fuse # 49 and the bolt head in the blue square is what we used for the earth.

 

[BusyBuilder]

I haven't got a multimeter. Thanks for above helpful replies, I plugged into fuse 50, all working as I wanted now, thanks all.