Changing bulbs

Joined
Sep 19, 2017
Posts
97
Likes collected
75
Funster No
50,596
Does anyone know how to access the bulbs in these units? They are a push unit on/off with no separate switch. Fitted to 2021 Bürstner.



PXL_20250315_080943100.webp

PXL_20250315_080947736.webp
 
Will watch with interest as ours don’t seem to work and don’t know how to access either
 
Upvote 0
I've found what looks to be the unit Dimatec push 12v. The silver cover can be gently prized off to reveal 3 screws. Not got further than that yet but suspect Lenny HB is correct in that it's a new unit required rather than a bulb change.

 
Upvote 0
I had a similar ‘touch’ light go defective just recently on our Adria recently - one of a pair on the opposing B pillars - and they’re not readily obtainable other than from the manufacturer, and you can guess how much that would be and how long to arrive.

Aliexpress came up with a pair of almost identical replacements for less than £10 that also have a touch dimmer function, and were delivered in 7 days.

Subscribers  do not see these advertisements

 
Upvote 0
Just a quick response as the replacement units have arrived. They are definitely a full unit replacement but should hopefully be a simple swap. The bezel is a different finish but I can use the original for that so they will still all match.
 
Upvote 0

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top