Anyone used 12v tyre inflator on Air awning? (27 Viewers)

Affiliate links here may earn MHF compensation
Apr 7, 2024
34
36
Funster No
102,261
MH
2017 Renault Master
I have been considering a 12v tyre inflator (twin cylinder jobbie like this)

inflator.jpg

For inflating my awning (and tyres/Motorbike/pedal etc) i was wondering if anyone has used anything like this and was it a waste of time or did it work?

These ones are allegedly 150psi with duty cycle of about 12 mins and 40L per min.

Cheers
 
Feb 24, 2013
13,507
102,971
Bolsover, Derbyshire
Funster No
24,833
MH
Hymer S800
Exp
not long enough
We use a Ryobi which has tyre outlet on one side and low pressure air bed on other, you don’t need much pressure and think you could easily damage the awning with too much pressure

Our hand stirrup pump is also more than adequate and doesn’t need many pumps
 
Sep 5, 2024
59
69
In a tin box
Funster No
106,205
MH
Building a PVC
Yes, it will work for tyres. Don't expect it to be quick or quiet though!

I've no experience with awnings but DavidG58's comments re: pressure ring true with me.
 
Feb 18, 2017
4,880
9,494
Greenwich, London, UK
Funster No
47,382
MH
Hymer MLT 570
Exp
1986
Waaaaay over the top for an Awning!
That is what may be needed for a Tour de France road bike or a Velodrome track bike.

The air pressure in an inflatable Tent/Awning is about 7-10 PSI.
A pump such as the one above will burst the tent.

If you can't be bothered with manual pumps, then you need a pump suitable for SUP's and other inflatable boats which typically only inflate to about 15 PSI maximum.
 
Aug 6, 2013
12,079
16,851
Kendal, Cumbria
Funster No
27,352
MH
Le-Voyageur RX958 Pl
Exp
since 1999
It will do the job - eventually. It is designed as high pressure / low flow rate. For inflating awnings / airbeds / boats you need the exact opposite.

Subscribers  do not see these advertisements

 
Jul 29, 2024
139
464
Funster No
105,029
MH
Imminent Purchase!
We use a Ryobi which has tyre outlet on one side and low pressure air bed on other, you don’t need much pressure and think you could easily damage the awning with too much pressure

Our hand stirrup pump is also more than adequate and doesn’t need many pumps
I second the motion.

Here's the older one. They split the newer ones to high pressure and low pressure variants.

Ryobi R18I-0 ONE+ Inflator, 18 V (Body Only) - Hyper Green https://www.amazon.co.uk/dp/B00B3FRB9Y?tag=mhf04-21
 
Apr 19, 2019
2,417
5,169
Funster No
60,021
MH
Carado T339
Exp
5 years
I think t would take hours to inflate an awning. As tonyidle says you need a lower pressure/higher volume pump. That's why the Dometic ones are so expensive
 
Sep 26, 2013
4,260
5,292
Market Rasen
Funster No
28,295
MH
Self Build
Exp
Since 2003
I used one of the small ones you get with cars nowadays and it only took a few minutes to pump a friends caravan air awning up.
 

Norfolk Nige

LIFE MEMBER
Jan 4, 2021
438
16,217
Norfolk
Funster No
78,709
MH
No longer have one
Exp
Caravanning since 1980, saw the light in 2020
You only need to pump to 9psi for an air awning
 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Funsters who are viewing this thread

Back
Top