600 watt Daewoo QT microwave

[Neil S]

Ive a Renogy 2000 watt inverter wired to a 230 amp Fogstar Lithuim battery with a 200amp inline fuse and isolator switch
What would be the draw in amps using a 600 watt daewoo QT microwave which requires 1000 watts input to drive it

 

[David and Sally]

Allowing for losses, about 90 amps on 12v? Experts are lining up to advise.

 

[Neil S]

Allowing for losses, about 90 amps on 12v? Experts are lining up to advise.

assuming your correct then that will work just fine since the battery can handle 150 amps continuous discharge rate

 

[BusyBuilder]

Is that 90ah ?

 

[headlight]

assuming your correct then that will work just fine since the battery can handle 150 amps continuous discharge rate

I think that you will find that the Fogstar 230AH is 200 amps continuous discharge, mine certainly is.

^{_{Subscribers  do not see these advertisements}}

 

[Neil S]

I think that you will find that the Fogstar 230AH is 200 amps continuous discharge, mine certainly is.

Your right , must have got my figures mixed up
So my setup should be ok for occasional use of the microwave

 

[headlight]

Your right , must have got my figures mixed up
So my setup should be ok for occasional use of the microwave

I have a 2,000 watt inverter running off my 230AH and use a 1,435 watt air fryer no problem.