I've gone lithium and had to replace all my chargers to be lithium friendly. At the moment, I've got the Victron IP22 mains charger wired to the battery, and it's working fine. But it's just plugged into a 3 pin socket with the wire tucked away.
The question is, can I safely cut the moulded plug off the charger and spur it straight into the mains wiring that feeds the Elekroblock without a fuse? If it were an EU spec charger, there wouldn't be a fuse in the plug, so I should be fine, right?
Note: the Elekroblock is still connected so I get the indicator on the panel, but the fuse for the charger is removed, so it doesn't interfere with the Victron.
The question is, can I safely cut the moulded plug off the charger and spur it straight into the mains wiring that feeds the Elekroblock without a fuse? If it were an EU spec charger, there wouldn't be a fuse in the plug, so I should be fine, right?
Note: the Elekroblock is still connected so I get the indicator on the panel, but the fuse for the charger is removed, so it doesn't interfere with the Victron.