Truma temperature sensor

[Rasputin]

On my Dethleffs Magic Edition, the internal temperature on the control panel always reads about 5 degrees centigrade too high. Adjusting the offset in the ‘Settings’ to minus 5 degrees makes no difference. I have replaced the sensor, but it also made no difference. Other than just living with it, any comments or suggestions ?

 

[Richard n Ann]

Does the temperature read out ever change? The only other thing to change would be the control panel. Or maybe fit a variable resistor in series or parallel with the sensor depending whether it's an NTC or PTC type. Personally I'd just live with it.. Same as my car clock I know it's 1 hour fast

 

[DT]

On my Dethleffs Magic Edition, the internal temperature on the control panel always reads about 5 degrees centigrade too high. Adjusting the offset in the ‘Settings’ to minus 5 degrees makes no difference. I have replaced the sensor, but it also made no difference. Other than just living with it, any comments or suggestions ?

Does it have an offset setting to compensate.