Thread size

[Rover1]

Anybody out there know the actual thread size of the fresh water taps at caravan and motorhome sites As I have always had trouble with filling up with water using my hosepipe fitting

 

[kevenh]

Oh! Abroad or in the UK?
I’ve had no thread comparability issues with my UK only trips.

 

[Two on Tour]

They are normally 3/4" BSP

Here's one that is 3/32 BSP and has a 1/2" BSP adapter as well.

Hozelock Threaded Tap Connector | Toolstation

Fits 1/2" and 3/4" taps.

www.toolstation.com

 

[NigelNovice]

1/2" or 3/4" BSP, I carry one of these in case its missing on site, the yellow bit is 3/4" and the black insert is 1/2" so depending on the standpipe you should be covered, I also have same brand hose ends so that they match

 

[kevenh]

^^^
I travel with the white (or black ) & yellow parts.
Haven’t had to use the white adapter part yet but the yellow part has been vey useful

Edit. Slow typer

^{_{Subscribers  do not see these advertisements}}

 

[rb62]

One of these can come in handy when there's a quick connect outlet