Spare wheel carrier 16” wheels

[Bessy765]

Appreciate this has been covered many times but info for a 2019 Burstner on the Fiat heavy chassis please.

 

[10tenmen]

This is mine on the heavy chassis. Simple easy diy fit.
First picture is the wheel and winch on the light chassis then second is where it fits on the heavy.
It fitted fine just had to make a block to support the wheel resting on the underside of the floor.

 

[Bessy765]

Many thanks for the pic’s could you tell me where you bought it from please

 

[10tenmen]

Got mine off eBay. Also a spare 16” wheel with a camper tyre. I also bought a pack of 6 riv nuts M 8 size.

Spare Wheel Support Repair Kit Original Fiat Ducato 150 D 6000629601 | eBay

Set Rehabilitation Support Wheel Spare Original FIAT Ducato 150 D 6000629601. Codice ricambio originale OE/OEM 6000629601. MPN 6000629601.

www.ebay.co.uk

 

[Bessy765]

Got mine off eBay. Also a spare 16” wheel with a camper tyre. I also bought a pack of 6 riv nuts M 8 size.

Spare Wheel Support Repair Kit Original Fiat Ducato 150 D 6000629601 | eBay

Set Rehabilitation Support Wheel Spare Original FIAT Ducato 150 D 6000629601. Codice ricambio originale OE/OEM 6000629601. MPN 6000629601.

www.ebay.co.uk

That brilliant all ordered thank you.

^{_{Subscribers  do not see these advertisements}}

 

[chippy63]

Did this come with winch tool & wheel knob, Just looking & coastal motorhomes who sell them
but they exclude these two items ?

https://www.ebay.co.uk/itm/28615228...pid=5339023013&customid=&toolid=10001&mkevt=1

Karl

 

[10tenmen]

Did this come with winch tool & wheel knob, Just looking & coastal motorhomes who sell them
but they exclude these two items ?

https://www.ebay.co.uk/itm/28615228...pid=5339023013&customid=&toolid=10001&mkevt=1

Karl

Yes they were included although the winch tool was in my jack tool box.

 

[treblid]

If you have alloy wheels, you will also need the adaptor plate and 3 special bolts to mount an alloy wheel in the carrier.

 

[chippy63]

Yes they were included although the winch tool was in my jack tool box.

What does the winch tool look like please ?

If you have alloy wheels, you will also need the adaptor plate and 3 special bolts to mount an alloy wheel in the carrier.

I'm probably just going to buy a steel wheel & tyre, rather than another alloy, but thanks for the info

 

[treblid]

I'm probably just going to buy a steel wheel & tyre, rather than another alloy, but thanks for the info

You will need it if you want to put the flat alloy in the carrier.

Mount: https://coastalmotorhomes.co.uk/fit...en-relay-wheel-mount-bracket-15-16-06-on.html

Bolts (3 required): https://coastalmotorhomes.co.uk/fia...-wheel-bolt-for-spare-wheel-holder-06-on.html

^{_{Subscribers  do not see these advertisements}}

 

[10tenmen]

What does the winch tool look like please ?

I'm probably just going to buy a steel wheel & tyre, rather than another alloy, but thanks for the info

This is the winch tool and where it fits onto the winder. I use a ratchet to wind it down.
Re the kit needed to fit the alloy wheel I didn’t bother I would put it inside and get a new tyre fitted then replace the steel spare back into the carrier.
The last pic is the wheel fitted with a cover to keep it clean and dry.