Shunt state of charge ?

[Figaro]

I fitted the Fogstar Drift 230 before Christmas.
SoC is 93% according to the Fodstar app at present and I manually input this into the Victrion smartshunt app.
However shunt keeps reverting SoC to 100%
This has been happening since fitted but as I had charging turned off on the Fogstar app I thought this maybe confusing things and be the issue.
But no, charging is now on and it still keeps reverting to 100% contrary to what the Fogstar says
Any ideas ?

 

[Googlebot]

I fitted the Fogstar Drift 230 before Christmas.
SoC is 93% according to the Fodstar app at present and I manually input this into the Victrion smartshunt app.
However shunt keeps reverting SoC to 100%
This has been happening since fitted but as I had charging turned off on the Fogstar app I thought this maybe confusing things and be the issue.
But no, charging is now on and it still keeps reverting to 100% contrary to what the Fogstar says
Any ideas ?

What shunt is it?

The Victron will register it fully charged if it exceeds a certain voltage for a certain time. It may just be you need to raise the voltage threshold.

Can you post a screenshot of your settings?

 

[Figaro]

I'm not in the van atm but I can get a screenshot of settings tomorrow
It's a Victron smartshunt

 

[Googlebot]

These are mine, the charged voltage of mine are 14.2v, they do vary. Basically, if it sits at that voltage for 3 minutes, the shunt detects it’s fully charged, which mine is at that voltage.

Fogstar should be able to give you the charged voltage.