- Oct 16, 2009
- 74
- 70
- Funster No
- 8,925
- MH
- Coachbuilt Pilote700
- Exp
- 20 years motorhoming, 20 years as a tugger!
Can someone please help me on this problem. My rear camera AV1 (normal display mode) on the display became intermittent and eventually failed as the cable running from camera to display the AV1 wire become open circuit. I then switched camera to the AV2 cable thinking that would resolve the situation. It now Works well on the AV2 display when in neutral and in any forward gear but once reverse is selected and the reverse sensor is triggered the display reverts to AV1 giving a blank screen! Has anyone experienced this and is there an easy way to stop the sensor wire from the gearbox/ stick activating the display. Any advice would be useful. Thanks. For any information
Note. I was told that it was the Green wire within the loom that was the triggger. However that was disconnected and
unfortunately no different!
Note. I was told that it was the Green wire within the loom that was the triggger. However that was disconnected and