Remis blinds for a 2021 Ducato

[KennyW]

I have a an Autotrail 669, Fiat Ducato 2021 x290, I have just bought the Remis blinds for the doors and front windscreen, doors fitted easily but the panel front panels are too big and don't match the brackets. Checked on You tube and everyone there seems to clip into place easily. Remis insist these are the right ones, has anyone else had this issue or needed to "trim" the existing panel?

 

[mitzimad]

Got any pictures when idid a fiat i had to remove existing a pillar trims

 

[KennyW]

Here's a couple of photos, to make it fit correctly it looks like I need to trim the top panel as can be seen in one photo, the other shows where the clips are when it is flush with the top panel.

 

[RedFrame]

May sound a stupid question, but are you sure that's not the right hand side blind...? (and upside down)

Cheers
Red.

 

[mitzimad]

Try swopping left to right or upside down

^{_{Subscribers  do not see these advertisements}}

 

[KennyW]

There definitely on the correct side, see photos below.

 

[RedFrame]

Give the Guys and Gals at Magnum Motorhomes a call, they should be able to advise.

Or pop into your local dealers and have a nose at one of their vans.

It looks like you may need to remove/loosen the upper trim to get the Remis moulding behind, you definitely won't need to cut the moulding.

Hopefully someone on here can post a photo of that area on their x290.

Good luck.

Cheers
Red