Reich Tap not pumping water

[Baxters@large]

So of course the tap stopped connecting to the water pump half way through our trip to Skye!

It's a Reich Vector S in our Bursner Nexxo 660 ('15 vintage) and I'm pretty sure it's the microswitch. I've tested that there is electricity getting to the tap but can hear the pump not firing up when the tap is opened.

Has anyone experience of replacing the switch on this tap (£15) as I really don't want to have to replace the tap (£100!!)

Thanks for any ideas

 

[Mr David]

Broken Link Removed

Baxters@large does this help?

 

[Baxters@large]

Broken Link Removed

Baxters@large does this help?

A bit thanks Mr David. Needless to say my tap is different in detail to the one described here but at least I was able to get the faucet off using this.

I found the Reich instructions for nearly my tap (in German) and have now ordered the TORX screwdriver set (who uses T6 for goodness sake?) I need to do the job. Hope I can source the microswitch once I've dismantled the pump! Oh the joys....