Motorhome Window Flyscreen Repair

[Broadway]

Good afternoon,

Does anyone have knowledge of taking one of these windows apart to fix the flyscreen?

The fly screen, which rolls upward, has ceased to retract, no tension in the spring mechanism.

I‘ve looked on line and various forums but can’t find anything for this specific model. It’s fitted to a coach built Autosleeper circa 2018.

Thanks in advance for any assistance.

 

[RobbyMClark]

.

 

[scotjimland]

How to Repair Caravan Cassette Blinds, Seitz & Remis Caravan Blinds Repair

So you need to repair your caravan cassette blinds, Don’t worry, it’s not as hard as you may think. Hopefully the information that I am about to give you in this article will save you

www.caraman.co.uk

 

[Broadway]

Thanks Scotjimland,

Unfortunately the video is for a different model.

The version I have does not have removable corners. There are 4 perforated sections which I suspect clip off to reveal various screw fastenings.

To avoid any mistakes and before giving it ago, I wanted to check if anyone has done this.

Cheers.

 

[Gerry77]

Do you have the type which have corner mouldings? They are just push on and you need to use a thin pallet type blade to ease them off and then you will expose the fixing screws.
Try this

^{_{Subscribers  do not see these advertisements}}

 

[Broadway]

Thanks Gerry77 unfortunately no.

The version I have doesn’t have removable corners. There are 4 perforated sections which I suspect clip off to reveal various screw fastenings.

 

[Gerry77]

Yes they are clipped on, you need to ease them off !

 

[Broadway]

Yes I see that from the video however you will see from the photo that this window does not have clip on corners.
I shall remove the vertical and horizontal perforated strips and see what’s behind.
Thanks again.

 

[Broadway]

I’ve now fixed the non retracting flyscreen which was caused by a broken tension bush not keeping the spring rod in place. I have used super glue and accelerator as a temporary repair, which has worked, whilst I await a new piece from Liesureshopdirect.com

it was all quite straightforward, the fun part is trying to keep the spring tensioned whisk inserting the rod end into the tension bush!!

I thought I would post the photos below to assist anyone with the same issue in the future.