MA-VE levelling system problems

Joined
Oct 5, 2024
Posts
4
Likes collected
1
Location
New Zealand
Funster No
106,963
MH
Avida Esperance
Exp
Since 2019
Hi I have a MA-VE leverling system installed for just under 2 yrs now .the operation of the rams seams to be very abrupt and has great difficulty trying to find level and shakes the violently especially during side ways operation . the installers have tried everything the can from relocation of the controller . Replacing the controller and the control panel plus they have upgraded the soft ware several times now but the van is still unable to .
just about at the point of removing the whole System and either replace the unit with something or sadly going back to ramps and chocks .

Anyone else had these sorts of problems would appreciate your fed back
 

Jim

Ringleader
Joined
Jul 19, 2007
Posts
37,384
Likes collected
137,832
Location
Sutton on Sea, UK
Funster No
1
MH
Adria Panel Van.
Exp
Since 1988
Have these issues been around since the system was first fitted? Have they ever worked properly?
 
Upvote 0
OP
OP
E
Joined
Oct 5, 2024
Posts
4
Likes collected
1
Location
New Zealand
Funster No
106,963
MH
Avida Esperance
Exp
Since 2019
Have these issues been around since the system was first fitted? Have they ever worked properly?
yes pretty much however every time it is recalibrated or new software installed its fine say in the garage or at the installers premises but ounce you move the van to say a campsite or even just down the road it goes back to not been able to find level and will arm out or just give up
 
Upvote 0

CAB96

LIFE MEMBER
Joined
Jan 31, 2021
Posts
1,360
Likes collected
2,667
Location
Stockport, UK
Funster No
79,035
MH
T6 Leisuredrive
Exp
4+
Time to get some legal advice.

Subscribers  do not see these advertisements

 
Upvote 0

CAB96

LIFE MEMBER
Joined
Jan 31, 2021
Posts
1,360
Likes collected
2,667
Location
Stockport, UK
Funster No
79,035
MH
T6 Leisuredrive
Exp
4+
From the other thread.

in regards to my post earlier re MA_VE problems is it possible to have some sort of electrical or interference with the controller form the Van itself ?

That's a thought. Not heard of that before.

But why does it work at the installers?

Anyway, best to keep to one thread, it's here :

You only have 2 free posts left, so use them wisely.
 
Upvote 0

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top