Ivevo agile, any knowledge? Pushed it hard up a hill smelt burning

[jongood]

Not me but a german guy here in Morocco is now having trouble selecting gears. There's an Iveco dealer just down the road in Agadir and I'm advising him to ignore the local guy and take it there. Does anyone know if there is a diy reset for it?

 

[funflair]

If it was clutch slip burning he should have had a overheat warning light, think I would err towards the IVECO place as well.

 

[Ditcha]

Not me but a german guy here in Morocco is now having trouble selecting gears. There's an Iveco dealer just down the road in Agadir and I'm advising him to ignore the local guy and take it there. Does anyone know if there is a diy reset for it?

Carpmart can you advise I know you have had agile problems

 

[Carpmart]

They recalibrate themselves. Electrical Mechanical actuated gears and clutch. I’ve had no problems with the clutch itself per se, although they don’t like traffic in hot weather, much like a comformatic in that regard. They also do seem clunky on pick up sometimes, then next use after switching off they engage smoothly again…

Being electrical, switched off for a while usually resets it, but it will obviously maintain any fault code. Could it be just his clutch is nearing end of life, starting to slip and he’s not recognised that and you get the vicious circle of clutch slip = heat = more slip etc…

Iveco dealer can reset kiss point on the clutch if needed, but a couple of miles should see it re learn itself.

Won’t help him on this specific occasion but The best advice I can give is to purchase MaxiECU and the Iveco specific interface. Can reset kiss point on clutch, clear faults etc etc..