HEADLAMP PROTECTORS WITH BEAM BENDERS

[jointerjohn]

For sale set of headlamp protectors with european beam benders applied , to fit fiat ducato 2006--2013/14 ? not certain when the cab changed, as new condition with instructions takes 10mins to fit then you can remove them when not driving in Europe, can anyone use them £40 ono.

 

[namwaldog]

By absolute sheer fluke, we stayed overnight last night in a friends yard and he has just changed vans, so he gave me a set of these but couldn't find the fitting instructions.
I couldn't beg a favour and have a readable image of the instructions could I?
Thanks

 

[jointerjohn]

Hi namwaldog here is the instructions you have to take off the triangular section (lift bonnet to expose two screws) fit the little stainless steel hook, this is what the protectors latch on to, the two plastic locating lugs slide in under the glass headlamp,this can be a little tight i put a little fairy liquid to make it easier,hope this helps.

 

[munkey_bwy]

Hi John,

I will have them if they are still for sale.

Dave

 

[namwaldog]

Thanks very much for that John, much appreciated. Good luck with the sale.

^{_{Subscribers  do not see these advertisements}}

 

[Bailey58]

I bought a set of these off @Minxy Girl and these are the instructions she gave me. Did I tell anyone my van was in limp mode? Well we got it back on Monday evening after eight painful weeks so our Norway trip is back on and I'm about to start doing some jobs on the van, Tyrepal sensors and headlamp covers among them.

• open the bonnet and above each headlight is a plastic quadrant shaped panel piece
• loosen the screws that hold the panel so you can lift it a little (you don't have to remove it)
• on the headlight covers fit the clips into the hole on the top each one
• put each cover over the light hooking the clip on the top of the headlight (under the panel) and push the bottom of the cover on
• tighten up the panel screws
• shut the bonnet

 

[Gellyneck]

I bought a set of these off @Minxy Girl and these are the instructions she gave me. Did I tell anyone my van was in limp mode? Well we got it back on Monday evening after eight painful weeks so our Norway trip is back on and I'm about to start doing some jobs on the van, Tyrepal sensors and headlamp covers among them.

• open the bonnet and above each headlight is a plastic quadrant shaped panel piece
• loosen the screws that hold the panel so you can lift it a little (you don't have to remove it)
• on the headlight covers fit the clips into the hole on the top each one
• put each cover over the light hooking the clip on the top of the headlight (under the panel) and push the bottom of the cover on
• tighten up the panel screws
• shut the bonnet (after making sure the bonnet clears the fitted headlamp protectors!!!!!)

 

[Bailey58]

Very useful!

 

[jointerjohn]

Hi munkey_bwy yes still for sale how do you want to proceed collection or courier ?

 

[namwaldog]

Does anyone know if the metal clips that go on the top of the protectors, can be bought separately? . My friend is struggling to find the one's that came with the set!!

^{_{Subscribers  do not see these advertisements}}

 

[jointerjohn]

just checked out courier price £4 to uk mainland.

 

[Bailey58]

Sorry my mobile no 07711045644

You may want to delete your phone number on an open forum and discuss your transaction in a conversation (private message).

 

[Viennese]

Are these still available? If not please remove from 'for sale'.

 

[jointerjohn]

Yes they are still available the person who said they wanted them never got back to me so i guess he changed his mind,