Hard Reset on a Rollerteam Boiler

[OakV]

Hi All,

Looking at the Truma screen and it keeps flashing up with the error code- E517H.

I am just wondering how to hard reset the boiler if that is the issue? I have tried to reset on the truma panel with no difference (there is a new gas bottle connected)

Thanks!

 

[suavecarve]

Any of the errors we have had only required the Truma panel resetting after the resolution (presumably new gas bottle) had been rectified

But google gives me this

For example a blinking E517H happens if you have tried to start the system 4 times without a suitable gas supply. The 3rd icon must be set to gas to clear this lockout. Truma advice says to turn off your heating and hot water systems and wait 15 minutes before connecting the gas and trying again.

And youtube gives me this

 

[OakV]

Any of the errors we have had only required the Truma panel resetting after the resolution (presumably new gas bottle) had been rectified

But google gives me this

For example a blinking E517H happens if you have tried to start the system 4 times without a suitable gas supply. The 3rd icon must be set to gas to clear this lockout. Truma advice says to turn off your heating and hot water systems and wait 15 minutes before connecting the gas and trying again.

Will give it a go, thanks!

 

[MalcMc]

We had numerous issues with our Truma unit (Rollerteam T590) finally went back in to Solent in Poole with a get this sorted or else, new pcb fitted to boiler now all okay.