Gaslow gauge.

[Speedytriple]

Hi all,

Does anyone know if there is an easy way to add a second fill indicator gauge to a Gaslow bottle.

Currently my van has a gauge but it’s barely visible and I have no idea which way is which (I didnt build the van)

This is what I can see through the locker door.. I filled the Gaslow up today so I know it’s full )it only took 2l) so the gauge didn’t move.



It would be really useful if a second gauge could be installed in a more easy to view place.

Thanks.

 

[Jabstatt]

You can Bluetooth it to an app.

Great option.

Tony

 

[TrudeandDall]

Hi all,

Does anyone know if there is an easy way to add a second fill indicator gauge to a Gaslow bottle.

Currently my van has a gauge but it’s barely visible and I have no idea which way is which (I didnt build the van)

This is what I can see through the locker door.. I filled the Gaslow up today so I know it’s full )it only took 2l) so the gauge didn’t move.

View attachment 1007036

It would be really useful if a second gauge could be installed in a more easy to view place.

Thanks.

Have you tried disconnecting the filling hose and pigtail, then turn the bottle so you can see the gauge and then reconnect the hoses in that orientation.. You would be surprised at what can be achieved..

 

[Lenny HB]

Those gauges only work once the tank is less than ½ full.

 

[GeoffnDee]

I have a Mopeka gas level sensor on the bottom of my Gaslow bottle and get a very accurate gas level reading on my phone from it.

^{_{Subscribers  do not see these advertisements}}

 

[Jabstatt]

Those gauges only work once the tank is less than ½ full.

Not both mine. They aren’t incredibly precise but move after maybe under ten percent.

Tony

 

[Basildog]

Hi all,

Does anyone know if there is an easy way to add a second fill indicator gauge to a Gaslow bottle.

Currently my van has a gauge but it’s barely visible and I have no idea which way is which (I didnt build the van)

This is what I can see through the locker door.. I filled the Gaslow up today so I know it’s full )it only took 2l) so the gauge didn’t move.

View attachment 1007036

It would be really useful if a second gauge could be installed in a more easy to view place.

Thanks.

Just a typical installation where the fitter hasn’t spent the time to install the cylinder in the correct orientation so the gauge can be viewed properly.
Easily sorted with a bit of extra time and care taken.

 

[G1969]

There is also these as per Roger video below, interested if anyone has fitted them?

 

[Brains]

You can buy the gages direct from GasLow.
So you could buy a new one and install in a way so that you can read it.

 

[Gordo]

There is also these as per Roger video below, interested if anyone has fitted them?

I’d be interested in this as well, but question how much more accurate it would be than the existing gauges? At roughly £80 per sender unit (I’d need two) it would have to be much more accurate than the standard gauges to make it worth doing.

^{_{Subscribers  do not see these advertisements}}

 

[G1969]

Error

 

[G1969]

They do a twin set

Gaslow Twin Cylinder Multivalve Remote Gauge

The Gaslow Remote Gas Gauge allows you to see the contents level of your twin Multivalve Gaslow bottles without having to go to the gas locker compartment to manually check the on bottle gauges. The kit comprises of two replacement wired gauge for the multi-valve on the cylinder, two 6 metre...

www.gaslowdirect.com

 

[Russ N Tracey]

I see others have said it too, I've got the Mopeka bluetooth device on the bottom of the gaslow bottle n it works fine.

 

[G1969]

I see others have said it too, I've got the Mopeka bluetooth device on the bottom of the gaslow bottle n it works fine.

Yes, I do too, but do like the idea of this permanent wired solution, and not having to change the batteries.

 

[Russ N Tracey]

Agree. I've not had to change the battery on mine yet, I think they last about 12 month (only guessing though)

^{_{Subscribers  do not see these advertisements}}