Flashing hab battery on control panel

[Paulypaul]

Just wondered if anyone can tell me why the control panel (LT71) in our van is flashing constantly on the hab battery status?

The victron 100/30 controller is showing that the voltage is at 12.65-12.70v and we've not experienced any loss of power or rapid discharge etc, but I'm just worried that the flashing status bar means something isn't right?

Can anyone suggest anything?

Thanks.

 

[The Old Man]

It's low on power?

Does it go off if you run the engine?

That's what mine does when I've watched too much TV!

 

[Paulypaul]

I did wonder that but the victron controller is showing that the hab batteries aren't low and the trends on the app show that they haven't been low. It's showing a voltage of between 12.60v and 12.70v so I'm not sure.
Coincidentally it's just stopped flashing but the voltage hasn't altered so could it be something to do with the actual control panel?

 

[1967bowesj]

Try turning the dial knob and see if it settles, looks like it between options

 

[Paulypaul]

Try turning the dial knob and see if it settles, looks like it between options

I've done that case that was my initial thought but even if I turn it to another setting such as the water level, and leave it, it seems to revert back to flashing.
Having said all of that it's not doing it all the time so I'm well confused?

^{_{Subscribers  do not see these advertisements}}

 

[1967bowesj]

I've done that case that was my initial thought but even if I turn it to another setting such as the water level, and leave it, it seems to revert back to flashing.
Having said all of that it's not doing it all the time so I'm well confused?

Mine doesnt flash but has a dull glow across several bits sometimes, think mines the panel though, dont switch it off now lol just incase