fitting dirt skirt to a motorhome

[WallaceandGromit]

Hi, after Wallace and Grommet's trip out, we came home and Grommet looked like he'd had a mud bath. So I've ordered a dirt skirt is it better fitted to the towbar or the back of the motorhome the towbar sits quite far from the MH leaving a large gap and my thinking is the muck will get blown up the rear wall if on the towbar. Any thoughts

 

[the1andonly]

All i can say i did this and it works a treat. The box/drainpipe holds waste pipe and poles.

 

[Larrynwin]

I fitted aluminium angle to chassis ends to secure dirt skirt to.

 

[WallaceandGromit]

All i can say i did this and it works a treat. The box/drainpipe holds waste pipe and poles.
View attachment 710613View attachment 710616View attachment 710619

Looks like that’ll work as your towbar looks similar to mine

 

[Verteuil Man]

I fitted aluminium angle to chassis ends to secure dirt skirt

All i can say i did this and it works a treat. The box/drainpipe holds waste pipe and poles.
View attachment 710613View attachment 710616View attachment 710619

Could I ask how you attached it to the box section?

^{_{Subscribers  do not see these advertisements}}

 

[WallaceandGromit]

Beat me to it

 

[the1andonly]

Not bright out there right now, or even too warm.
lets see if this works. On previous picture (middle one)the pipe is held by 2 wall clips to the crash bar mount.

The M10 bolt is removed from crashbar bracket and replaced by a longer one that also goes through a length of 20x20 aluminium extrusion. 2 holes 90 degrees to this mount is for the 6mm screws holding the wall bracket.
A piece of angle would do,(probably wouldnt need a longer bolt) i used what i had in shed.

Hope this makes sufficient sence