WANTED Fiamma Carry-Bike Lift 77 Cycle Rack

[Two on Tour]

My poor old shoulders are starting to rebel against lifting our e-bikes onto our present bike carrier, so does anyone have a Fiamma Carry-Bike Lift 77 cycle rack they want to flog.
Would prefer the E-bike version, but would be happy with the standard version.

 

[StanandShirley]

Not sure if you would be interested in our electric bike lift, we used it to lift our two battery assisted bikes not using it as new van we able to store inside garage. Have it on the site for £600 as we live in Chatteris it’s not far to have a look if interested. Safe Travels Stan

 

[Two on Tour]

Thanks for the thought Stan, but I forked out for a new Fiamma Lift 77 a couple of weeks ago.
Sorry I should have added to this thread that I had bought one.

 

[hilldweller]

but I forked out for a new Fiamma Lift 77 a couple of weeks ago.

Had ours over a year now, absolutely brilliant.

 

[Two on Tour]

Had ours over a year now, absolutely brilliant.

Ditto, hummed and harred over the cost for some time, but hey, it's only money.

As well as the ease of getting our E-bike on and off the rack now, the other big advantage is now I don't have to wobble about on a set of steps trying to put the bike cover on.

^{_{Subscribers  do not see these advertisements}}

 

[Techno]

Rapido and FIAMMA 77 bike lift

Template for top fixing points knocked up from aluminium angle Marked a pencil line across from side to side in line with the bottom of the curved panel. Measured the centre and used the template to mark the holes for drilling. Hung the rack on the top hangers and then centred the...

www.motorhomefun.co.uk

 

[Two on Tour]

I was concerned with the mounting points on the back wall of our previous bike rack in that when the E-bikes were on the rack internally the back wall moved away from the bathroom wash basin leaving a good 3mm gap and of course with bumps in the road this must open up even more.
To cure this I fitted the Fiamma carry-bike reinforcement fixing bars. Once the bars were fitted their there was no movement in the back wall whatsoever.

I don't know if the winder on the standard Lift 77 has changed, but on the E-bike version the winder consists of a universal joint with a hexagonal stub mounted on it, so my cordless drill fits straight on it.