DIY motorcycle workshop

[Manic]

Saw this on Henry Cole’s motorcycle show and thought it was a good idea, get use of machine etc.

DIY ENGINEERING WORKSHOP now open

A full engineering and metal fabrication workshop from £1 a day

the-machine-shop.co.uk

 

[andyman]

They advertise all sorts of services on ebay

 

[TheTwoOfUs]

I saw that and my first thought was who would be responsible if someone used the lathe without sufficient training/experience and injured either themselves or someone else?

 

[David and Sally]

Good idea. Saw it on TMS too.

 

[Jaws]

Saw this on Henry Cole’s motorcycle show and thought it was a good idea, get use of machine etc.

DIY ENGINEERING WORKSHOP now open

A full engineering and metal fabrication workshop from £1 a day

the-machine-shop.co.uk

But WHERE is it ?

^{_{Subscribers  do not see these advertisements}}

 

[Two on Tour]

But WHERE is it ?

Scroll down to the bottom of the page for a map.

DIY ENGINEERING WORKSHOP 11pm every night 7 days a week

A full engineering and metal fabrication workshop from £1 a day

the-machine-shop.co.uk

 

[dunnah01]

The website shows:
33 Sketchley Meadows, Burbage, Hinckley LE10 3ES

 

[pappajohn]

But WHERE is it ?

That would be useful.
Nothing on the website gives a clue.

As for Henry Cole..... He makes a good presenter but he can't ride a bike.

 

[Jaws]

That would be useful.
Nothing on the website gives a clue.

As for Henry Cole..... He makes a good presenter but he can't ride a bike.

He is quite good company and is a nice sort of bloke ( for a posh geezer ) but I think he makes a poor show of himself when on telly ..
Hard to explain but his tv presence often makes me cringe !

 

[Jaws]

The website shows:
33 Sketchley Meadows, Burbage, Hinckley LE10 3ES

Trouble with things like that though, it could just be a registered office, but looking at the map proly not LOL !!!

It was the map that I missed....

^{_{Subscribers  do not see these advertisements}}

 

[Two on Tour]

33 Sketchley Meadows, Burbage, Hinckley LE10 3ES is on an industrial estate, 2 units along from number 35, closest I could get on Google street view.

 

[glenn2926]

I saw that and my first thought was who would be responsible if someone used the lathe without sufficient training/experience and injured either themselves or someone else?

I suppose there has to be someone who I’ll always look for a negative.

 

[Raul]

I guess you’re responsible for yourself, same as parking in a public car park at own risk.

 

[Jaws]

The only thing I am short of nowadays is my own TIG set.. At the moment I have to go round to one of the factories and beg a few minutes use of theirs. If it aint being used they do not mind as I always drop the owner a few quidlets for consumables etc, but if that place was closer I would proly make use of it