Chausson 718XLB led strip light replacement help please

[Tony50]

Hi on entering the habitation door right in front of me is a Led vertical strip light about 4 foot tall on the end of the Dinet bench seat , has anyone replaced this lamp as it is trapped behind the vertical Perspex lens , if you have could you advise me how to replace the Led strip light. it looks like a nightmare.

Tony A.

 

[TG1903]

I think this is led tape rather than a lamp , which I think is stuck on with self adhesive tape to the perspex

 

[Tony50]

Hi TG1903 ,yes it is a stick on Led and it is behind the vertical Perspex , trouble is when I looked at dismantling it looks complicated unless the perplex is stuck on ,I'm a bit scared if I pull on it the Perspex will break, thanks for comments if you actually know how to remove Perspex that would be a great help as I have the length of led lights.

Tony A

 

[mitzimad]

i think tg was suggesting that this is already led

 

[TG1903]

By looking at it there is screws which hold the plastic curved bit on at the top behind head rest and also under the seat cushions beside the water tank, I wld presume this would take it off and allow you to replace the Led Tape , which looks like it's stuck on with self adhesive tape , as mine was coming apart after 37 degrees temps in the van in Germany, I just used a Stick like s**t to re attach it

^{_{Subscribers  do not see these advertisements}}

 

[Tony50]

By looking at it there is screws which hold the plastic curved bit on at the top behind head rest and also under the seat cushions beside the water tank, I wld presume this would take it off and allow you to replace the Led Tape , which looks like it's stuck on with self adhesive tape , as mine was coming apart after 37 degrees temps in the van in Germany, I just used a Stick like s**t to re attach it

When you say it's coming away in the heat ,do you mean the vertical Perspex ? sorry along while coming back thanks

Tony A.

 

[TG1903]

Yes , it looked like the adhesive had got soft and started to detach from the seat , re attached with adhesive and it's been fine