NOT . At the Monteriggioni sosta tonight . Pretty much brand site , room for 20+ and we are one of 4 here tonight . Mind you the view is dreadful ;-)
Busy in Italy
- Thread starter Jewellbags
- Start date
Looks a narrow entrance? 
Mikey RV
LIFE MEMBER
It is high though. 
OP
OP
Lots of lubeLooks a narrow entrance?
The Roman chariot had a fixed axle width.Looks a narrow entrance?
Which has governed the width of European roads, gateways, tunnels and later the railways ever since.
Famously even the NASA rockets are limited to the same width due to the Roman road system rules as the rockets are moved by rail.
Subscribers do not see these advertisements
The US Standard railroad gauge (distance between the rails) is 4 feet, 8 1/2 inches.
That’s an exceedingly odd number. Why was that gauge used?
Because that’s the way they built them in England, and the US railroads were built by English expatriates.
I see, but why did the English build them like that?
Because the first railway lines were built by the same people who built the pre-railroad tramways, and that’s the gauge they used.
Well, why did they use that gauge in England?
Because the people who built the tramways used the same jigs and tools that they used for building wagons, which used that wheel spacing.
Okay! Why did their wagons use that odd wheel spacing?
Because, if they tried to use any other spacing the wagon wheels would break on some of the old, long distance roads. Because that’s the spacing of the old wheel ruts.
So who built these old rutted roads?
The first long distance roads in Europe were built by Imperial Rome for the benefit of their legions. The Roman roads have been used ever since.
And the ruts?
The original ruts, which everyone else had to match for fear of destroying their wagons, were first made by the wheels of Roman war chariots. Since the chariots were made for or by Imperial Rome they were all alike in the matter of wheel spacing.
Thus, we have the answer to the original question. The United States standard railroad gauge of 4 feet, 8 1/2 inches derives from the original specification for an Imperial Roman army war chariot on Roman roads!
That’s an exceedingly odd number. Why was that gauge used?
Because that’s the way they built them in England, and the US railroads were built by English expatriates.
I see, but why did the English build them like that?
Because the first railway lines were built by the same people who built the pre-railroad tramways, and that’s the gauge they used.
Well, why did they use that gauge in England?
Because the people who built the tramways used the same jigs and tools that they used for building wagons, which used that wheel spacing.
Okay! Why did their wagons use that odd wheel spacing?
Because, if they tried to use any other spacing the wagon wheels would break on some of the old, long distance roads. Because that’s the spacing of the old wheel ruts.
So who built these old rutted roads?
The first long distance roads in Europe were built by Imperial Rome for the benefit of their legions. The Roman roads have been used ever since.
And the ruts?
The original ruts, which everyone else had to match for fear of destroying their wagons, were first made by the wheels of Roman war chariots. Since the chariots were made for or by Imperial Rome they were all alike in the matter of wheel spacing.
Thus, we have the answer to the original question. The United States standard railroad gauge of 4 feet, 8 1/2 inches derives from the original specification for an Imperial Roman army war chariot on Roman roads!
I feel your pain having to stay there…….
Join us or log in to post a reply.
To join in you must be a member of MotorhomeFun
Join MotorhomeFun
Join us, it quick and easy!
Log in
Already a member? Log in here.