Burstner table

[orourkeith]

Hi guys , I’m having trouble dropping the table down to make up the bed , I pull the pin out and the first strut drops down but that’s as far as it goes the middle piece in the picture won’t go into the cream part with the cut out , I have the pin pulled out and had one of the kids sitting on the table and still won’t budge , Spraying some wd40 also , Any ideas. ?

 

[gus-lopez]

Hopefully someone who has your model,or similar, might be along to help.

 

[Morning Major]

Hello, I would take it apart, clean and add a thin film of 3 in 1. If it doesn’t come apart then pull up and clean and oil what you can.

Once done make sure you are pushing down square to try and stop it jamming just like that famous reggae singer.