Bed slats

[kontikimark]

Hello
Could someone help or put me in the right direction, I’m seeking new bed slats for the overhead cab and the slat ends.
the slats are beech and a funny size 1190mm x 53mm x 8mm. I have a parts No 10500233. And order No 275814 138181
The slat ends are 40mm wide and 60 deep with one stud. I have contacted many slat manufacturers but unfortunately not found
any. If you could steer me in the right direction please.

 

[kev54]

Many suppliers on Google. When doing the same, I had to get nearest / larger and trim them to fit in the plastic ends. Good luck!

 

[stuartholmes]

Hello
Could someone help or put me in the right direction, I’m seeking new bed slats for the overhead cab and the slat ends.
the slats are beech and a funny size 1190mm x 53mm x 8mm. I have a parts No 10500233. And order No 275814 138181
The slat ends are 40mm wide and 60 deep with one stud. I have contacted many slat manufacturers but unfortunately not found
any. If you could steer me in the right direction please.

I'm not familiar with those exact measurements but have you checked whether Ikea have anything near enough that you can trim if needed? They are quite big on slats for beds..

 

[trophychap]

B&Q stock bed slats at their larger depots, I have bought a few myself over the years.

 

[DDJC]

Get them cut to size.

I had the same problem and used these guys.

Buy Bed Slats |Wooden Bed Slats| UK

The Bed Slats Company are a leading UK distributor of Wooden bed slats. Our premium quality wooden Bed Slats which are produced by the best timber merchant in UK comes in all sizes and we provide custom made bed slats to suit your requirements. Visit our website and get great offers on our...

www.thebedslatscompany.co.uk

They have different woods and thicknesses and cut to the size you specify. I was surprised at how cheap they were as well.

^{_{Subscribers  do not see these advertisements}}

 

[Folkranger]

B&Q stock bed slats at their larger depots, I have bought a few myself over the years.

Me too.

 

[kontikimark]

Hello and thank you for all your feed back. I found a company that have the length I need but not thickness (8mm) but have gone for 12mm and they will chamfer the ends to fit the holders.
If you need slats for your Motorhome THE BED SLATS WORKSHOP can help you.
Thank you again.

 

[Gromett]

Hello and thank you for all your feed back. I found a company that have the length I need but not thickness (8mm) but have gone for 12mm and they will chamfer the ends to fit the holders.
If you need slats for your Motorhome THE BED SLATS WORKSHOP can help you.
Thank you again.

Thanks for coming back and letting us know how you resolved this. Love hearing how people resolved their problems.