beam benders

[toyota]

hello everyone and thank you if you can help me out.
i have beam deflectors on my van best way to get them off and adhesive.
many thanks.

 

[TCG]

hairdryer

 

[David and Sally]

Hair dryer and then meths to take off residual sticky stuff.

Google

To remove European beam deflectors (also called headlight beam adaptors), turn on your headlights to full beam for a few minutes to heat up the adhesive, then carefully peel back the deflector using a plastic card or similar tool, taking care to lift the adhesive layer as you go; clean any remaining residue with an alcohol-based cleaner like methylated spirits, avoiding harsh chemicals that could damage the headlight lens.

Key points to remember:

• Heat is key: Always warm up the adhesive by turning on your headlights before attempting to remove the deflectors.
  
  
• Use a plastic tool: Avoid using metal tools that could scratch your headlight lens.
  
  
• Clean with alcohol: Use an alcohol-based cleaner to remove any leftover adhesive.
  
  
• Do not use harsh chemicals: Avoid using white spirit, petrol, or nail polish remover as they can damage the headlight plastic.
  

Detailed steps:

1. Turn on headlights: Switch on your headlights to full beam and let them run for a few minutes to heat up the adhesive.
   
   
2. Locate the edge: Find the edge of the beam deflector on your headlight.
   
   
3. Insert a plastic tool: Carefully insert a plastic card or similar tool under the edge of the deflector to start peeling it away.
   
   
4. Peel slowly: Gradually peel back the deflector, lifting the adhesive layer as you go.
   
   
5. Clean residue: Once the deflector is removed, use a clean cloth dampened with an alcohol-based cleaner to remove any remaining adhesive residue.