- Feb 14, 2021
- 4,518
- 10,289
- Funster No
- 79,219
- MH
- Burstner Lyseo 727G
- Exp
- 3 years 30,000 miles UK and Europe.. Campsites and off Grid.
When I got the van it had one Leisure battery . Since then I have added two more. Same type/make/power.
If I take the reading from the Burstner gauge it always seems to be at least 0.5V lower than a reading direct from the battery on my multi meter.
Is the Burstner gauge reading incorrectly because it was set up for one battery and now has 3 or is it just not very accurate. I am not aware there is anyway of resetting/calibrating the gauge.
Below is shown when the batteries are receiving charge from the solar. It's reading max of 13.5 but the multimeter is showing 14V. Probably not the best example as the gauge stops at 13.5.
Any thoughts/ideas?
If I take the reading from the Burstner gauge it always seems to be at least 0.5V lower than a reading direct from the battery on my multi meter.
Is the Burstner gauge reading incorrectly because it was set up for one battery and now has 3 or is it just not very accurate. I am not aware there is anyway of resetting/calibrating the gauge.
Below is shown when the batteries are receiving charge from the solar. It's reading max of 13.5 but the multimeter is showing 14V. Probably not the best example as the gauge stops at 13.5.
Any thoughts/ideas?
