Autotrail F62 Waste tank

[Geoffrey B]

Hi All
I have an Autotrail F62 bought new in April this year, first time of using it we noticed that the waste tank meter never showed any % full, Asked the dealer who said that the meter only registers when it is full. Is this correct please, new to motorhome.
Many thanks

 

[Jo-jo]

Yes, we have a new F60 and it will only show 0% or 100%. Page 12 of the online manual confirms this. The control panel will bleep when the waste tank is full.

Out of interest, does your temperature & humidity guage show correctly? Ours permanently shows internal temp 24°c & 50% humidity and outside temp of 21°c.

 

[plug]

Hi All
I have an Autotrail F62 bought new in April this year, first time of using it we noticed that the waste tank meter never showed any % full, Asked the dealer who said that the meter only registers when it is full. Is this correct please, new to motorhome.
Many thanks

Hi
I have a tracker eks one of the last from the factory, when I am filling my water tank up, it shows you how much you have in the tank and it counts down in 100-75-50-25-0, so I think maybe your dealer is fobbing you off as I can’t see Autotrail changing a proven gauge for the Motorhomes, I know the gauges can be temperamental Sometimes but I think your may not be working correctly.
You can go on the Autotrail customer support and they will confirm if you have a problem or confirm how your gauge should work.

 

[Jo-jo]

Hi
I have a tracker eks one of the last from the factory, when I am filling my water tank up, it shows you how much you have in the tank and it counts down in 100-75-50-25-0, so I think maybe your dealer is fobbing you off as I can’t see Autotrail changing a proven gauge for the Motorhomes, I know the gauges can be temperamental Sometimes but I think your may not be working correctly.
You can go on the Autotrail customer support and they will confirm if you have a problem or confirm how your gauge should work.

It's the waste tank gauge that the OP was querying.

 

[plug]

It's the waste tank gauge that the OP was querying.

Both the fresh and the grey operate the both the same with independent gauges

^{_{Subscribers  do not see these advertisements}}

 

[Jo-jo]

This is a screenshot of the F-Line 2024 manual, ours does not have waste water levels as per the OP:
(I can't make the image bigger, but should be able to on a phone).

 

[Vic]

Accountants strike again. What a stupid system.

 

[Jo-jo]

It doesn't look as if Geoffrey B has been back to see any responses anyway

 

[Geoffrey B]

It doesn't look as if Geoffrey B has been back to see any responses anyway

Sorry, I have not been able to View for the last couple of days, thank you all for your reply’s, the fresh water works fine, it is just the waste lank levels

 

[Geoffrey B]

Yes, we have a new F60 and it will only show 0% or 100%. Page 12 of the online manual confirms this. The control panel will bleep when the waste tank is full.

Out of interest, does your temperature & humidity guage show correctly? Ours permanently shows internal temp 24°c & 50% humidity and outside temp of 21°c.

My van is in storage at the moment, but I am sure the temp has been changing as per the correct temp

^{_{Subscribers  do not see these advertisements}}

 

[Jo-jo]

Kannon Fodda submitted a new resource:

Sargent EC176 Power Supply Unit Manual - EC176 Power Control System & EC361 / EC262 Control Panel



Read more about this resource...

Have a look at the manual posted here for your (our) control panel. It's definitely correct, that it only displays waste water as 0% or 100%.

I'd be interested in your temp/humidity gauge next time you're in your MH please.