Amber side lights and high red light not working

[Teddy B]

Hi I’ve a Elddis accordo 17 reg and the 3 amber lights on the n/s and the red/clear light high up are not working, the front and rear side lights are all ok.any ideas if there is a fuse or how they are wired. Thanks

 

[TerryL]

Almost certainly a fuse - but where you find it! Apart from the fusebox by the drivers knee, which would be my first targewt, there'll probably be another for the habitation electrics and that could be anywhere. On my Swift it's on the bulkhead behind the drivers seat but I don't know the Elddis. Your handbook ought to be able to indicate which fuse it'll be. Sorry can't be any more helpful.

 

[meanders]

Don't know the van but first question is are the lights or reflectors? We had an Eldiss Autoquest years ago. Having climbed up the back, the high level reds were just a plastic reflector.

 

[The Wino]

My money is on a dodgy shared earth. Try connecting a wire from a good earth to the negative on one of the lights if they then come on investigate!

 

[Dorwyn]

My side lights have never worked on my 2020 115, but there are wires to them. Can't decide where the fuses would be, they must have been fitted by Elddis as they are not normally on a standard Boxer, but there seems to be nothing on the habitation fuse box under the sofa. So I'll be interested in the outcome

^{_{Subscribers  do not see these advertisements}}

 

[Teddy B]

Don't know the van but first question is are the lights or reflectors? We had an Eldiss Autoquest years ago. Having climbed up the back, the high level reds were just a plastic reflector.

Definitely lights only o/s not working

 

[Landy Andy]

Mine are powered via the canbus system. So when one packs up and causes a short it takes the others with it. I had to disconnect them all, and reconnect one at a time to find the failed LED one.