Fuse for drop down bed (1 Viewer)

[Mickthemove]

Hi, i think i have bown the fuse, but do not have the foggiest idea where the fuse is, i presumed it would be in line to the motor but could not see it, any ideas would be apreciated Mick

 

[namwaldog]

We have a sliding/rising bed on our Burstner. It is operated by a 12v motor. The power to the motor is on the same circuit as the 12v for the TV and is controlled by a 10A fuse on the Schaudt Electroblok EBL 99.

I managed to trace it by trying everything in the MH that uses 12v power to see if anything else didn't work.

Good Luck

 

[Mickthemove]

We have a sliding/rising bed on our Burstner. It is operated by a 12v motor. The power to the motor is on the same circuit as the 12v for the TV and is controlled by a 10A fuse on the Schaudt Electroblok EBL 99.

I managed to trace it by trying everything in the MH that uses 12v power to see if anything else didn't work.

Good Luck

Thank you, i will have a gander