Electric table down, will not come up? (1 Viewer)

[dubaskiver]

Hi as a new chausson owner with a 2013 Suite Mini, the electric table has gone down, but refuses to come back up any suggestions would be gratefully received, thanks in anticipation. John.

 

[Stealaway]

Fuse? Is the table seized?

 

[dubaskiver]

Hi all, found the problem, a dodgy loose connection on the back of the switch, making intermittently, all working now

 

[RetiredPope]

Had the same thing, have now replaced the key switch with a rocker switch, no more catching my leg on the key.

 

[Yerfdog]

My switch has broken what do I replace it with

^{_{Subscribers  do not see these advertisements}}

 

[RetiredPope]

I ordered a replacement switch from RS Components part 620-5841. This has the advantage of fitting into the existing hole. If you look at the original switch, there are 2 contact blocks attached to the bottom of the switch. These unclip and then there is a nut holding the switch against the wall. I also bought 2 new contact blocks (399-3618) because the originals don't fit the Eaton switch. If you get a switch from the manufacturer of the original contacts they will clip on the back. You can also manually activate the contact block to check if its a broken switch or relay. My aim was to get rid of the key. It's easier than it sounds.